Nilight 6.5" 120W Spot & Flood Combo LED Pod Lights — Pair with 10ft 16AWG Harness, IP67, 6000K

Nilight ZH303 are 6.5" 120W spot-and-flood combo LED pod lights sold as a pair with a 10ft 16AWG dual-lead wiring harness for off-road and utility lighting.

These compact LED pods combine concentrated spot beams and wide flood illumination in a rugged 6063 aluminum housing with PC lens and thermal management for extended service life. Designed to run from 9–30V DC, they fit most 12V and 24V vehicle systems and include a wiring harness with connectors sized for installations up to 180W total load. The assemblies are rated IP67 for protection against dust and water, and are intended for off-road, worksite, and auxiliary lighting applications where DOT street-legal approval may not apply.

How bright are these Nilight ZH303 pods and what color does the light produce?

The ZH303 pods use 40 high-intensity 3W LEDs (120W total) that output a clear, pure white 6000–6500K color temperature suitable for task and auxiliary driving illumination. The combo beam mixes a focused spot pattern for distance with a flood pattern for peripheral coverage.

• Rated 120W per pod (40 x 3W LEDs) for strong lumen output.
• 6000–6500K pure white for crisp visibility without yellow tint.
• Spot + flood optics balance long-range and wide-area lighting.
• PC lens and quality LED chips for consistent light distribution.

Will the ZH303 work with my 12V or 24V vehicle electrical system?

Yes — these pods accept a broad input range of 9–30V DC, so they’re compatible with most automotive and heavy-duty 12V and 24V systems. The included 10ft wiring harness with dual leads and 16AWG wire simplifies hookup and supports a combined maximum of 180W/15A at 12V.

• Input voltage: 9–30V DC compatible with 12V/24V vehicles.
• Wiring harness: 10ft length with two power leads for easy routing.
• Maximum recommended load: 180W total, 15A limit at 12V.
• High-quality 16AWG conductors for improved conductivity and heat tolerance.

How durable and weatherproof are the pods for off-road use?

Nilight designed the ZH303 to withstand harsh conditions with a 6063 aluminum alloy body for heat dissipation, IP67 sealing for water and dust resistance, and a vibration-resistant sliding mounting bracket. The build suits off-road, construction, and utility environments where dust, splash, and mechanical vibration are common.

• IP67 rating: waterproof and dustproof in wet and dusty conditions.
• 6063 aluminum profile and thermal grease for effective heat transfer.
• Sliding bracket and robust fasteners to reduce movement and rattling.
• PC lens and corrosion-resistant finishes for extended exterior life.

How do I use the wiring harness and where can these lights be installed?

The included 10ft wiring harness features two power connectors to attach to each pod and is sized for flexible routing on trucks, SUVs, ATVs, trailers, and work machinery. It’s suitable for off-road and many worksite lighting needs; note that these are aftermarket non-DOT products and may not be legal for on-road use in all jurisdictions.

• Wiring kit includes 2 leads and connectors for both pods, 10ft length for reach.
• Mount on bumpers, roof racks, roll cages, or work booms using the sliding bracket.
• Appropriate for off-road vehicles, utility equipment, and outdoor work lights.
• Not DOT-approved — check local regulations before on-road installation.

Who is this for: The Nilight ZH303 pair is aimed at off-road enthusiasts, tradespeople, and fleet operators who need compact, high-output auxiliary lighting for nighttime work or trail use. It appeals to anyone wanting a durable, bright combo-beam solution that fits 12V/24V systems and installs with a pre-made 10ft 16AWG harness — provided they understand these are aftermarket, off-road-intended lights.