Nilight Forged Trailer Hitch Mount with 2-5/16" Ball — 2" Receiver, 15,000 lb GVW, 2" Drop, Gloss Black

This tow ball mount is built for drivers who need a rugged, simple connection between their 2-inch hitch receiver and trailers, campers, ATVs or equipment carriers. Forged steel construction and a two-stage protective finish combine to deliver strength and long-term durability, while the included pin and clip make setup straightforward. The mount's 2-inch drop and 8.5-inch overall length keep trailer tongue height and clearance predictable for most towing setups.

How strong is the Nilight forged hitch and what loads can it take?

The mount is designed to handle a gross trailer weight of up to 15,000 pounds with a 1,500-pound tongue load when used with the specified hardware and ball. These ratings assume the assembled unit (ball installed) and proper installation into a 2-inch receiver; removing or changing components may alter load limits. Always verify vehicle and hitch receiver ratings before towing.

• Gross trailer weight (GTW): up to 15,000 lbs
• Tongue weight: up to 1,500 lbs
• Shank size: fits standard 2" x 2" hitch receivers
• Ball diameter: 2-5/16" for heavy-duty couplers

What are the physical specifications and fitment details?

This Nilight ball mount uses a 2" x 2" shank that slides into any industry-standard 2-inch receiver and secures with the included 5/8" hitch pin. The mount has a 2-inch drop to help match trailer tongue height, a 1-1/4" ball hole, and measures about 8-1/2 inches end-to-end for predictable clearance. Check your trailer and vehicle measurements to confirm this geometry is suitable.

• Shank: 2" x 2" square
• Overall length: 8.5" for common clearance needs
• Drop: 2" to lower the hitch ball from receiver centerline
• Pin hole: 5/8" to accept included pin and clip

How does the finish protect the hitch and what maintenance is needed?

Nilight applies a two-stage protective process—an e-coat undercoat followed by a high-grade textured black powder coat—while the tow ball itself features polished chrome plating. This combination reduces corrosion and surface wear from road exposure. Regular rinsing after salt or heavy mud exposure and occasional inspection for scratches will keep the protective layers effective.

• E-coat pre-coating for base corrosion resistance
• Textured black powder coat for durable exterior protection
• Polished chrome tow ball to resist rust and ease coupling
• Recommended: rinse after salt exposure and inspect yearly

What is included and how simple is installation?

The package arrives with the forged ball mount, a 2-5/16" trailer ball preinstalled, and a 5/8" pin with clip to lock the shank into your receiver. Installing the unit is a one-person task: slide the shank into the 2" receiver, align the pin hole, insert the hitch pin and secure with the clip. No extra tools are required beyond basic hand strength to position and secure the pin.

• Included: forged mount with 2-5/16" ball
• Included: 5/8" hitch pin and retaining clip
• Installation: slide, align, insert pin, clip—done
• Notes: confirm vehicle/hitch ratings before towing

Who is this for? The Nilight forged trailer hitch ball mount is intended for truck, SUV and van owners who tow heavier trailers, campers, or equipment and need a durable, low-maintenance connector that fits a standard 2" receiver. It's suited to owners who want a simple, dependable install with strong load capacity and a corrosion-resistant finish. If your towing setup specifies a 2-5/16" ball and the vehicle’s hitch and frame ratings meet or exceed the mount's limits, this Nilight mount offers a practical heavy-duty option.