Noico Solutions Noico Pro 80 mil Car Sound Deadening Mat 10 sq ft — 2 mm Butyl Foil, Heavy Vibration Dampening

This automotive audio insulation pack contains 19 pre-cut sheets of heavy, 80 mil (2 mm) butyl-backed foil material that adheres directly to vehicle panels. Engineered to add mass and damp vibrations, the Noico Pro mat is sold in a compact 10 square foot stack that’s meant for door skins, floor pans, trunks, and other metal surfaces where noise and rattles originate. The material is heavier than standard 50 mil options and includes an embossing alignment indicator to help installers confirm a smooth, professional finish.

How does Noico Pro 80 mil improve in-car sound and reduce rattles?

The mat adds mass to metal panels, converting vibrational energy into heat and reducing panel resonance that contributes to road and audio-system noise. The butyl compound bonds firmly to surfaces while the foil facing provides an additional barrier to airborne sound. It won’t eliminate all external noise, but it significantly lowers panel vibration and reduces common sources of rattles.

• 80 mil (2 mm) thickness increases damping compared with thinner materials
• 0.7 lb per square foot weight for full-weight performance
• Foil facing helps block airborne noise in addition to vibration dampening
• Self-adhesive backing sticks directly to metal and other suitable substrates

What are the practical installation steps and features to expect?

Noico Pro comes in 19 compact sheets sized about 250 × 200 mm (9.84 × 7.87 in), making trimming and fitting straightforward for DIYers. Start with clean, dry surfaces, peel the liner, press the sheet firmly into place, and roll the foil until the embossing smooths—this embossing acts as a built-in indicator that the sheet is properly adhered. A roller tool is recommended for full contact but is not included.

• 19 pre-cut sheets for easier handling and pattern placement
• Embossed foil pattern that flattens when properly installed
• Sheets are small enough for tight areas like door cavities and speaker buckets
• Requires surface prep and optional roller for best adhesion

How much coverage and material performance does this 10 sqft pack provide?

The package covers roughly 10 square feet (0.95 m²) total, with each sheet contributing to the stack’s coverage. At 80 mil thickness and a total sheet weight of about 0.7 lb per square foot, the material provides a noticeably heavier damping layer than standard 50 mil sheets, delivering proportionally greater vibration reduction in treated zones. Exact results depend on the amount and placement of material used across the vehicle.

• Total area: 10 sq ft (0.95 m²)
• Sheet count: 19 pieces, each 250 × 200 mm nominal size
• Nominal thickness: 80 mil (2 mm)
• Weight: 0.7 lb per sq ft for full-weight performance

Who is this for? Noico Pro 80 mil is aimed at automotive DIYers, audio enthusiasts, and installers who want a compact, heavy-duty damping solution for doors, floors, trunks, and other metal panels. It’s particularly useful when you need thicker, high-mass material in small quantities to target specific resonance or rattle issues without committing to a full-car kit. Professionals will appreciate the easy-to-handle sheet sizes and the embossed install indicator for consistent results.