Noico Solutions Pro 80 mil Car Sound Deadening Mat — 36 sq ft Butyl-Aluminum Dampening for Doors, Floors & Trunks

Noico Pro 80 mil is a heavy-duty butyl and aluminum sound-deadening mat that reduces road noise and vibration across 36 square feet of coverage.

Designed for automotive enthusiasts and DIY installers, this Pro series sheet combines dense butyl compound with a foil facing to block and dampen panels, floors, doors and trunks. Thicker than standard options, these mats aim to lower rattles and improve cabin acoustic performance while remaining easy to cut and apply by hand. The stack of 34 manageable sheets fits common car retrofits and audio upgrades where extra mass and adhesion are required.

How much noise reduction can I expect from a thicker mat?

Increasing material thickness raises mass and internal damping, which helps reduce mid- and low-frequency vibration that causes droning and panel rattles. Noico Pro's 80 mil (about 2 mm) thickness is engineered to add measurable damping compared with thinner films, making it suitable for panels that flex under road and engine loads.

• Nominal thickness: 80 mil (2 mm) for stronger damping
• Weighted construction: about 0.7 lb per square foot for effective mass loading
• Best for doors, floors, trunks, and roof panels that need stiffness and vibration control

Is installation something I can do at home?

Yes—Noico Pro is produced with a self-adhesive butyl backing and comes in modest-size sheets to simplify cutting and placement. The foil face has a patterned embossing that visually indicates proper application once it is rolled flat, helping DIYers confirm a firm bond without specialist tools.

• Sheet size: 9.84 x 15.74 inches for easy handling and trimming
• Adhesive backing: tacky butyl sticks to clean metal surfaces
• Installation tip: use a roller (not included) to smooth sheets and eliminate air pockets

Which vehicle areas benefit most from the Noico Pro 80 mil mat?

The mat excels where panels vibrate or transmit structure-borne noise into the cabin. Apply it to the undersides of floor panels, door shells, trunk lids and rear decks to stiffen metal and reduce resonance that competes with sound systems or amplifies road noise.

• Floors and firewalls: reduces road and drivetrain rumble
• Door skins: cuts panel flutter and improves speaker performance
• Trunk and hatch: dampens boom and rattles at low frequencies

What are the product specs and how many sheets will I receive?

Noico Pro 80 mil ships as a stack that covers 36 square feet in total, broken into 34 sheets sized for convenient layout and cutting. The material weight and foil face are optimized for automotive use while remaining pliable enough to conform to curved surfaces.

• Total coverage: 36 sq ft (3.4 m²)
• Number of sheets: 34 pieces per pack
• Recommended tools: utility knife and roller (roller not included)

Who is this for? Noico Pro 80 mil suits car owners upgrading audio systems, installers aiming to reduce rattles and singers wanting a quieter cabin for clearer sound. It’s aimed at DIY mechanics and professionals who need a thicker, heavy-weight butyl mat that’s straightforward to apply and delivers consistent damping across common automotive surfaces.