NTLTPYY SP9158M Electric Fuel Pump Module for Toyota Camry 2002-2006 — Direct OE Fit, Corrosion-Resistant

NTLTPYY SP9158M is a direct-replacement in-tank electric fuel pump module engineered to restore factory fuel delivery for Toyota Camry 2002–2006 2.4L I4, 3.0L V6 and Camry 2004–2006 3.3L V6 models.

When a vehicle shows hard starts, hesitation under acceleration, or uneven fuel pressure, the fuel pump module is often the root cause. This NTLTPYY SP9158M assembly is built to match OE fit and flow characteristics while resisting corrosion and heat, helping bring your Camry’s fuel system back to reliable operation. The module is sized compactly (about 9.25 × 6.89 × 5.51 inches) and weighs roughly 2.09 pounds, making replacement straightforward for technicians and knowledgeable DIYers.

How does this fuel pump module match my Camry’s original equipment performance?

The SP9158M is designed to meet the original pump’s fuel flow and pressure targets, ensuring the engine receives a consistent supply under idle and load. That preserves drivability and helps avoid lean conditions that cause rough running. It also interfaces with the factory electrical and outlet fittings for a clean swap.

• Compatible with OE part numbers: 77020-33210, 77020-33100, 77020-33110.
• Engine platforms supported: 2.4L I4, 3.0L V6, and 3.3L V6 (specified years).
• Designed for correct fuel pressure and calibrated flow matching factory specs.

What durability features prevent premature failure?

NTLTPYY built the module with a corrosion-resistant housing and a reinforced internal structure to withstand corrosive fuels and heat cycles. The electric pump and driver module are bench-tested for fuel flow and thermal resilience to reduce chances of early failure on the road. These protections improve long-term reliability compared with generic replacements.

• Corrosion-resistant outer housing to resist fuel degradation.
• High-strength internal components to handle vibration and pressure spikes.
• Heat and flow testing performed to ensure consistent operation.

Will installing this restore fuel economy and acceleration?

Replacing a weakened or failing pump with an SP9158M restores steady fuel pressure and metered flow to the injectors, which can improve throttle response and reduce fuel-wasteful running conditions. While exact economy gains depend on vehicle condition, a properly functioning pump helps the engine operate efficiently. It also reduces symptoms like bogging on acceleration or extended cranking times.

• Stabilized fuel pressure reduces lean spikes and misfires.
• Continuous in-tank supply prevents fuel starvation under load.
• Optimized flow supports efficient combustion and consistent power output.

How should I confirm fitment before ordering?

Always verify the existing pump’s part number and compare the connector and mounting style to ensure compatibility. Check your Camry’s year and engine size against the listed fitment (2002–2006 Camry models specified). If uncertain, inspect the OE numbers printed on the current module or consult a service manual for confirmation.

• Confirm vehicle year and engine (2.4L I4, 3.0L V6, 3.3L V6 where stated).
• Compare OE numbers: 77020-33210, 77020-33100, 77020-33110.
• Verify electrical connector and mounting flange match the existing module.

Who is this for: NTLTPYY SP9158M is intended for Toyota Camry owners, independent mechanics, and fleet service shops needing a reliable direct-replacement fuel pump module to restore factory-level fuel delivery. It’s suitable for anyone repairing a Camry with symptoms of low fuel pressure, hard starts, or intermittent power loss, provided they confirm fitment with the OE numbers and engine configuration before purchase.