OBD2 Adapter FORSCans VINT-TT55502 ELMconfig ELM327

The VINTscan VINT-TT55502 is a modified ELM327 USB OBD2 interface that lets Windows users run FORScan, ELMconfig and other Ford-focused tools to read codes, change settings and access MS-CAN/HS-CAN systems on 1996+ Ford cars and light trucks.

This compact adapter combines an ELM327-compatible USB interface with a hardware MS-CAN / HS-CAN toggle, optimized for Ford vehicles and light pickups. Designed to work with Windows-based diagnostic software such as FORScan, FoCCCus, ELMconfig and FF2, it provides a reliable connection for reading diagnostic trouble codes (DTCs), viewing live data and applying many non-invasive configuration changes. It runs at a stable 500 kbit/s bus speed and supports both generic OBD2 functions and manufacturer-specific commands used by Ford models from 1996 onward.

How does this adapter connect to my Ford and Windows laptop?

Install the adapter into the vehicle’s OBD2 port and plug the USB into a Windows PC, then install the appropriate drivers and launch your chosen ELM327-based software. The included MS-CAN/HS-CAN switch lets you select the bus required by specific modules so the software can communicate correctly.

• USB-A to PC connection for Windows (driver installation required)
• OBD2 male plug for standard diagnostic port access
• Physical MS-CAN / HS-CAN toggle to access both Ford network layers
• Stable 500 kbit/s communication speed for consistent data streaming

What Ford features and mods can I enable with FORScan and this adapter?

Using FORScan or other supported programs, the adapter unlocks a range of configurable options and convenience mods without intrusive hardware changes. These are software-level edits that alter module settings, correct sensor parameters, and enable or disable factory features.

• Global Window operation and reverse tilt mirror settings
• Tire size correction and perimeter parking assists like Perpendicular Park
• Feature toggles such as heated steering wheel activation and double-horn disable
• Custom behaviors: Secure Idle, 5-flash turn signal, door chime adjustments

Which vehicles and diagnostics are supported by this interface?

The VINTscan adapter is tailored for Ford cars and light trucks from 1996 onward, covering popular models and many modules accessed through MS-CAN and HS-CAN networks. It retrieves generic OBD2 DTCs as well as Ford-specific trouble codes and live parameters when used with compatible software.

• Compatible models include F-150, F-250, F-350, F-450, Ranger, Transit and Mustang
• Works with other Ford nameplates such as Mondeo, Fusion, Kuga, Explorer and Edge
• Supports reading/clearing DTCs, live sensor data and as-built configuration
• Windows-only software compatibility for full FORScan functionality

Is this tool safe to use for programming and module access?

When used correctly with up-to-date software and following vendor guidance, the adapter is intended for non-destructive configuration and diagnostics. Always back up original module data, apply changes one at a time, and ensure vehicle battery and connections are stable before making adjustments.

• Perform full backups of as-built data before programming
• Use official FORScan or recommended community tools for Ford modules
• Apply single changes and verify vehicle behavior after each edit
• Avoid unsupported operations and follow software warnings to reduce risk

Who is this for: Technically-inclined Ford owners, fleet technicians and enthusiast DIYers who want deeper access to diagnostics and configurable features on 1996-and-newer Ford cars and light trucks. If you run Windows, are comfortable installing drivers and using vehicle diagnostic software, and want to read DTCs, stream live data or enable factory features via FORScan/ELMconfig, this adapter is built to provide a dependable connection and the MS-CAN/HS-CAN access required for many Ford-specific tasks.