Orion Motor Tech Front Wheel Hub Puller Set – Universal 3-3/4"–4-1/2" Hubs, 5/8"x18 Forcing Bolt

Orion Motor Tech's OMT Front Wheel Hub Puller Set is a universal tool kit designed to remove stuck front wheel hubs on most independent front suspension vehicles quickly and safely.

When a front wheel hub gets corroded or pressed onto the axle, removing it without damaging the surrounding components can be frustrating and time-consuming. This OMT kit includes a universal hub puller sized for 3-3/4" to 4-1/2" hubs, a 5/8" x 18 forcing bolt, a fastening lug nut, and a dedicated socket so you can apply even, controlled force to extract the hub while leaving the wheel bearing and joint intact. The components are made from heat-treated AISI 1045 medium carbon steel and finished for corrosion resistance, giving you a durable set for repeated garage or shop use.

How does this puller make hub removal easier?

The puller set works by clamping securely to the axle assembly and using a threaded forcing bolt to push the hub free with straight, centered pressure. That controlled action prevents uneven prying that can damage studs, bearings, or adjacent components. The included socket and lug nut let you assemble and apply torque quickly, speeding the removal process.

• Universal clamp fits 3-3/4" to 4-1/2" hub diameters
• 5/8" x 18 forcing bolt provides straight axial force
• Fasten lug nut and socket included for quick setup
• Designed to leave wheel bearing and joint undisturbed

Which vehicles and hubs are compatible with this set?

The OMT Front Wheel Hub Puller is built to work with most vehicles that use independent front wheel suspension and hubs within the specified 3-3/4" to 4-1/2" diameter range. Because the forcing bolt uses a common 5/8" x 18 thread, it can also be matched with other adapters for broader fitment across makes and models. Always verify hub diameter and axle configuration before use.

• Fits many domestic and import cars with independent front suspension
• Measures hubs between 3-3/4" and 4-1/2" diameter
• 5/8" x 18 forcing bolt offers adapter compatibility
• Works with aftermarket adapters for non-standard setups

What materials and durability features does the set offer?

Orion Motor Tech manufactures the puller components from AISI 1045 medium carbon steel, a material chosen for its strength and machinability. Parts are heat-treated for toughness and finished with either a blackened or chrome-plated surface to resist corrosion and wear, ensuring reliable service in workshop environments. The robust construction supports repeated use under high torque without deformation.

• AISI 1045 medium carbon steel construction for strength
• Heat treatment improves toughness and longevity
• Blackened or chrome finish for corrosion resistance
• Threaded bolt designed to withstand high axial loads

How do I use the kit safely and effectively?

Set the vehicle securely on jack stands and remove the wheel to access the hub assembly. Position the universal puller so it locks onto the axle housing or hub flange, thread the 5/8" x 18 forcing bolt through the center, and turn the bolt incrementally with the provided socket while checking alignment. Use steady, even turns to avoid sudden slips; if the hub resists, apply penetrating oil and allow time for loosening before continuing.

• Ensure vehicle is supported and wheel removed before starting
• Align puller concentrically to prevent side load on components
• Turn forcing bolt slowly and evenly; reapply penetrating oil if needed
• Inspect studs and bearings after removal for wear or damage

Who is this for: The Orion Motor Tech OMT Front Wheel Hub Puller Set is aimed at mechanics, DIY enthusiasts, and home-garage technicians who service front-end components on passenger vehicles. If you frequently work on front hubs, wheel bearings, or suspension assemblies and need a robust, reusable tool to remove seized or pressed-on hubs without costly damage, this kit delivers a practical, long-lasting solution.