Oxford White YZ/Z1 Touch Up Paint for Ford OEM Color Match

This precision touch-up paint delivers an Oxford White color match created for Ford models, packaged in a convenient 2-in-1 bottle with both a pen pin and brush for controlled application. The formula emphasizes adhesion, rust resistance and quick drying so you can conceal chips and scratches without a full repaint. It’s sized for small repairs but covers enough area to handle several blemishes, making it a practical item to keep in the garage or glovebox.

How accurate is the color match for Ford Oxford White YZ/Z1?

The pigment blend is tuned to Ford’s Oxford White YZ/Z1 OEM formula to minimize visible differences when applied correctly. Expect very close results on properly prepared surfaces, especially under typical daylight and after the paint cures.

• Engineered to match Ford OEM Oxford White YZ/Z1 shades
• Best results when applied to clean, degreased, sanded chips
• Test on a scrap surface or paper before applying to vehicle
• Small lighting or texture differences possible depending on surface finish

How do I apply the Artbreath touch-up paint for a seamless finish?

Preparation and technique matter: remove loose paint, clean and degrease the area, then shake the bottle for about one minute to mix thoroughly. Use the pen pin for pinpoint chips and the brush for slightly larger areas; multiple thin layers build a smoother repair than a single thick coat.

• Clean and degrease the damaged area first
• Shake bottle for one minute to mix pigment evenly
• Apply thin coats, allowing roughly 10 minutes drying between layers
• Finish by leveling or polishing when fully cured for better blend

What protection and durability can I expect from this touch-up paint?

The formula focuses on adhesion, rust inhibition and water resistance so repaired areas resist further corrosion and exposure. While it won’t replicate a factory clear coat’s full longevity, it significantly improves appearance and helps protect exposed metal until a major repair is performed.

• Strong adhesion to metal and OEM finishes
• Anti-rust additives reduce corrosion risk at treated spots
• Waterproof once fully cured to protect underlying surfaces
• Quick drying—initial set in about 10 minutes for faster layering

How much area does the 0.4 fl oz bottle cover and how should I store it?

Each 0.4 fl oz bottle covers roughly 0.08 square meters, enough to address multiple chips and small dings across bumpers, doors and trim. Store the bottle upright, tightly sealed, and in a cool, dry place away from direct sunlight to preserve the pigment and solvent balance.

• Covers approximately 0.08 square meters per bottle
• Multiple small repairs or one larger touch-up per bottle
• Store capped, upright, in a cool dry place to maintain shelf life
• Contact seller for assistance if the color or finish is unsatisfactory

Who is this for: Artbreath Oxford White YZ/Z1 touch-up paint is designed for Ford owners who want a fast, economical way to hide chips and scratches without professional bodywork. It’s ideal for DIY enthusiasts, detailers performing quick repairs, and drivers preparing a vehicle for sale or daily use who want to maintain a factory-like appearance between full paint jobs.