Pangda Fuel Line Hose NBR Rubber Hose Line 1/4" Transfer

Pangda's 1/4" NBR fuel line is a 20-foot, high-flexibility fuel transfer hose engineered for small engines, boats, motorcycles and automotive fuel systems.

This heavy-duty NBR (nitrile butadiene rubber) hose provides a balance of flexibility, chemical resistance and working pressure suitable for many fuel-supply tasks. It measures approximately 1/4 inch (6 mm) inside diameter and 0.47 inches (12 mm) outside diameter, and is supplied as a single 20 ft (6 m) length. Designed for routine fuel transfer and supply applications, the hose resists common fuels and oils while operating across a wide temperature range.

What operating conditions can this hose handle?

The Pangda fuel line supports a broad temperature range and a robust working pressure, making it appropriate for varied environments. It is rated for temperatures from -40°C to 120°C and a working pressure of 300 PSI, with a burst pressure substantially higher for added safety margin.

• Temperature range: -40°C to 120°C for cold starts to hot climates
• Working pressure: 300 PSI for typical transfer and supply tasks
• Burst pressure: approximately 1160 PSI for short-term overload protection
• Material stability: NBR resists fuel, oil and many common petroleum products

How does the hose fit into marine and small-engine fuel systems?

This hose is sized and constructed for gravity-feed, primer-bulb or small pump systems used on boats, motorcycles, autos and RC helicopters. Its 1/4" inner diameter and 20 ft length give flexibility for routing and installation while the NBR compound helps resist fuel degradation.

• Inner diameter: approx. 1/4" (6 mm) for small-engine fuel lines
• Outer diameter: approx. 0.47" (12 mm) for common clamps and fittings
• Length: 20 ft (6 m) to reach tanks, pumps and carburetors without seams
• Recommended use: with a primer light bulb or small transfer pump (primer bulb not included)

Is this hose durable and easy to install?

Pangda manufactures the hose from NBR rubber with careful workmanship to ensure flexibility and abrasion resistance. The construction resists cracking and fading over time while remaining easy to cut and mount with standard fuel hose clamps and fittings.

• Material: nitrile butadiene rubber (NBR) for fuel and oil resistance
• Durability: designed to resist cracking, fading and ordinary wear
• Installation: cut-to-length, fits standard 1/4" fuel fittings and clamps
• Usage note: avoid routing through sharp edges and confirm tank filter compatibility

Who is this for? The Pangda 1/4" NBR fuel line is aimed at DIY mechanics, boat owners, motorcyclists and hobbyists who need a reliable 20-foot length of fuel-rated tubing for fuel supply, transfer or replacement lines. It suits small-engine repair, marine fuel routing, primer-bulb setups and emergency replacement where a flexible, fuel-resistant hose with clear pressure ratings is required. Always inspect fittings, use appropriate clamps, and verify compatibility with your vehicle’s anti-theft or in-tank filters before installation.