PESIKO 1L Brake Bleeder Bottle with 24 inch Tube and Rubber

This kit gives you a simple way to remove contaminated brake fluid from cars, motorcycles, ATVs and scooters without making a mess or introducing air into the hydraulic system. Built from corrosion-resistant plastic, the 1-liter bottle pairs with a flexible 60 cm (24 in) hose, a rubber adapter that fits most bleed nipples, and a chain with hooks to secure the assembly while you work. It’s intended as an affordable, reusable aid for routine maintenance and emergency bleeding tasks.

How do I use the PESIKO brake bleeder for a single-wheel bleed?

Using the PESIKO bottle is straightforward: attach the rubber connector to the bleed screw, route the hose into the reservoir, and pump the brake pedal until fluid runs clear and air bubbles stop appearing. Repeat the process for each wheel while monitoring the master cylinder fluid level to avoid drawing air into the system.

• Attach rubber connector to bleed nipple securely.
• Hang or clamp bottle using chain and hooks to keep it lower than the bleed screw.
• Press pedal, open bleed screw, allow fluid to flow until clear and bubble-free.
• Tighten nipple, check master cylinder, then move to next wheel.

What vehicles and brake systems is this compatible with?

The PESIKO 1L bleeder works with most hydraulic brake systems found on cars, motorcycles, ATVs, dirt bikes and scooters. The rubber connector is designed to fit a wide range of bleed screws; for larger or unusual fittings, an adapter or our 4L manual bleeder may be preferable.

• Universal rubber connector fits common bleed nipples.
• Suitable for disc and drum hydraulic systems that use conventional brake fluid.
• Compact 1L size is convenient for bikes and small vehicles; pairs with 4L unit for fleet or heavy-duty jobs.

What safety and durability features should I expect?

PESIKO constructed the bottle from rigid, corrosion-resistant plastic to withstand contact with brake fluid and repeated use. The clear body helps you monitor fluid color and bubble presence, while the long hose reduces strain and keeps waste fluid away from painted surfaces.

• High-rigidity plastic resists chemical corrosion and cracking.
• Transparent bottle body for quick visual inspection.
• 24-inch hose lets you position the bottle securely below the bleed point to prevent backflow.

How do I keep the bleeder working well and avoid contamination?

Clean the hose and connector after each use and store the kit capped and upright to prevent debris or moisture entering the system. Replace the rubber connector if it shows cracking or deformation, and always discard collected waste fluid according to local regulations.

• Rinse with compatible solvent or fresh brake fluid, then dry before storage.
• Inspect rubber joint and hose for wear before each job.
• Dispose of used brake fluid at approved recycling points—do not pour down drains.

Who is this for: The PESIKO 1L Brake Bleeder Bottle is ideal for DIY mechanics, motorcycle owners, ATV riders and small-fleet maintenance teams who need an economical, portable tool to remove old brake fluid and purge air from hydraulic lines. It’s best for routine single-wheel bleeding and quick emergency use; pair it with PESIKO’s larger manual bleeder for heavier jobs or when bleeding multiple lines continuously.