Phoenix Systems Brake Fluid Test Strips — 100 per Tube, Copper/White Indicator, 60-sec Color Change

Phoenix Systems BrakeStrip (3001-B) are single-use test strips that quickly reveal brake fluid condition so you can decide when a fluid exchange is needed.

Brake fluid degrades over time and can allow corrosion and contamination to build inside a vehicle’s braking system. The Phoenix Systems BrakeStrip offers a fast, scientific way to check fluid quality on-site: remove a strip, dip it into the brake fluid, wait 60 seconds, and compare the color change to the indicator scale. That quick measurement helps technicians and service advisors recommend fluid service with confidence instead of guessing.

How accurate is a BrakeStrip reading for determining brake fluid health?

The strip uses a color-change reagent that reacts to contaminants and corrosive byproducts in the fluid, producing an easy-to-read result in about one minute. It’s designed to follow common industry test approaches and is compatible with DOT 3, DOT 4 and DOT 5.1 fluids—covering most passenger and light-duty vehicles.

• Fast 60-second color reaction for immediate results
• Works with DOT 3, 4 and 5.1 brake fluids
• Colorimetric output simplifies technician decisions
• Reduces reliance on subjective judgement during inspections

How does BrakeStrip help a shop increase brake service revenue?

Providing a visible, science-backed test result makes it easier to justify and sell a necessary brake-fluid exchange to customers. Instead of recommending a service based on age or mileage alone, technicians can show the test strip as proof, improving conversion and trust.

• Gives customers tangible evidence for service recommendations
• Supports service advisors with objective test data
• Encourages preventative maintenance to avoid expensive repairs
• Supplies 100 strips per tube for multiple inspections

What is the proper way to use a BrakeStrip in a workshop?

Using the strip is straightforward and requires minimal training. Remove a single strip from the sealed tube, dip it into a brake fluid sample for the time indicated, wait 60 seconds, then compare the color to the included reference chart to determine fluid condition.

• Pull one strip from the tube; do not touch the reagent pad
• Dip the pad briefly into brake fluid and remove immediately
• Wait one minute for the color to develop, then read against the chart
• Dispose of used strip; maintain tube seal to preserve unused strips

What can a BrakeStrip detect and what should I do with the result?

The strip indicates contamination levels and the presence of corrosive elements that signal fluid breakdown; it does not diagnose mechanical faults but highlights when fluid replacement is advisable. Use the result to guide maintenance: schedule a brake-fluid exchange when the strip shows advanced degradation or elevated contamination.

• Flagged results point to accelerated fluid aging or contamination
• Early-stage readings suggest monitoring and planned service
• Advanced deterioration readings warrant immediate fluid exchange
• Helps prevent internal corrosion and costly component repairs

Who is this for: The Phoenix Systems BrakeStrip 3001-B is intended for automotive service centers, fleet maintenance teams, DOT inspectors, and DIY enthusiasts who want quick, reliable evidence of brake fluid condition. Each tube contains 100 individually usable strips, making it a practical choice for busy workshops looking to add a low-cost, high-impact diagnostic step to routine brake inspections.