PLUMIA 12V 100W Oil Extractor Pump — Dipstick Fluid Transfer Kit with Hoses & Clamps

The PLUMIA 12V 100W Oil Extractor Pump is an electric dipstick-style fluid transfer kit that safely removes engine oil and other compatible fluids without crawling under the vehicle.

Whether you perform routine maintenance at home or need a portable solution for marine and small-engine work, this PLUMIA kit simplifies fluid removal. It runs from a 12V source and includes hoses, clamps, battery clips and gloves so you can evacuate oil, gear fluid or diesel cleanly and quickly. The extractor is designed for convenience and to limit mess compared with traditional drain-and-refill methods.

How does the PLUMIA pump work and what power does it need?

The pump connects to a 12V DC supply with included battery clips or clamps; flip the switch and the motor draws fluid through the inlet hose and sends it out the outlet hose. It uses a 100W motor capable of steady extraction for typical automotive and marine fluids when used as directed.

• Runs from 12V DC — compatible with car or boat battery.
• 100W motor provides consistent suction for oil and similar fluids.
• Separate inlet and outlet hoses prevent cross-flow.
• Includes hose locks and clamps to minimize leaks during operation.

Is it safe to extract different fluids with this pump?

The PLUMIA extractor is suitable for engine oil, transmission fluid and diesel. It is not intended for gasoline, water, or other incompatible liquids. Follow the manual and safety precautions to avoid motor overheating or damage when fluid flow is restricted.

• Designed for oil, gear oil and diesel only — avoid gasoline and water.
• Do not run continuously if fluid cannot be pumped; allow cool-down periods.
• Use gloves and secure hose locks to prevent spills and contamination.
• Check hose direction and battery polarity before starting.

How fast and effective is fluid removal using this kit?

Flow depends on the fluid type and temperature: diesel moves faster than thicker engine oil. Warming the engine to a moderate operating temperature helps thin the oil and improves flow, reducing strain on the motor and shortening extraction time.

• Diesel: higher flow rate for quicker evacuation.
• Engine oil flows better when warmed to roughly 40–60°C (104–140°F).
• Copper-wound motor built for repeated use when operated with proper pauses.
• Complete kit includes two hoses, clamps, screwdriver and gloves for a tidy job.

What accessories come with the pump and how do they help?

The PLUMIA kit arrives with all the basic fittings needed to start extracting fluid right away. Hoses, hose locks, battery clips and a user guide are provided so you can set up quickly and maintain a sealed transfer path to a drain container.

• 1 inlet hose (10mm ID / 12mm OD, 1.2m) and 1 outlet hose (14mm ID / 16mm OD, 1.4m).
• Four hose locks and two outlet hoses to secure connections and prevent leaks.
• Battery clips for 12V hookup and a screwdriver for minor setup adjustments.
• Oil-proof gloves and manual included for safe handling and reference.

Who is this for? DIY mechanics, boat owners, ATV and motorcycle riders, and small-engine technicians who want a portable, time-saving way to remove oil and similar fluids without getting under the vehicle will find this PLUMIA extractor useful. It’s best for users who follow the instructions, warm fluids when practical, and avoid using the device with prohibited liquids. For routine oil changes, gearbox service and mobile maintenance tasks, this kit offers a cleaner, more convenient alternative to conventional drainage.