PQY 2" Black Aluminum Remote Fuel Filler Neck Kit — Billet Cap & Weld-On Bracket for Fuel Cells

If you’re building or modifying a dune buggy, sand rail, hot rod, trike, or any custom vehicle that uses a separate fuel cell, this remote filler neck makes adding an exterior fill point simple, secure, and visually tidy. The assembly pairs a 2.0" aluminum filler neck and matching billet cap with a robust alloy-steel bracket so you can mount the fill point outside the cabin and route fuel lines back to the tank or cell.

How does the PQY remote filler neck fit into a custom fuel system?

The remote filler neck is intended to connect to a 2" fuel filler hose, creating an external access point for fueling. It attaches to the tank or fuel cell via hose, leaving the cap reachable on the vehicle’s body while the tank stays hidden or protected inside the chassis.

• Designed for 2.0" ID filler hoses commonly used on performance fuel cells.
• Straight neck design simplifies hose routing and reduces bends.
• Includes billet aluminum gas cap for a sealed, finished appearance.
• Weld-on alloy-steel bracket secures the neck to an external panel or frame point.

What materials and construction should I expect from this kit?

The PQY kit combines lightweight aluminum components with a durable steel bracket. The filler neck and cap are aluminum for corrosion resistance and a clean finish, while the mount bracket is alloy steel to withstand repeated use and support the assembly under vibration.

• Filler neck and cap: machined aluminum, black finish.
• Mount bracket: alloy steel with weld-on design for permanent installation.
• Cap style: billet appearance for a refined aftermarket look.
• Hardware: packaged to match kit components for immediate installation.

How difficult is installation and what hardware is included?

Installation is straightforward for anyone comfortable cutting, welding, and routing fuel hose on custom builds. The kit ships with the filler neck, billet cap, and a weld-on mount bracket; fuel hose and clamps are typically supplied separately to let you choose hose type and length for your layout.

• Package contents: 1 remote filler neck with billet aluminum gas cap, 1 weld-on mount bracket.
• Requires welding the bracket into place or welding to a welded tab for secure mounting.
• Hose connection: fits standard 2" fuel filler neck hose (hose and clamps not included).
• Best tools: grinder/cutter for panel prep, welder for bracket, basic hand tools for final assembly.

Will this filler neck work on my vehicle and what should I check before buying?

Confirm your fuel hose inner diameter and the space available for an external fill point before purchasing. This 2" neck is typical for many aftermarket fuel cells and performance tanks, but checking hose compatibility and available panel location prevents fitment surprises.

• Verify your fuel hose ID is 2.0" for a secure slip-fit connection.
• Measure clearance behind the mount area for hose routing to the tank or cell.
• Ensure you can perform or arrange a weld for the included bracket installation.
• Consider corrosion-protection coatings if installed in high-exposure locations.

Who is this for: The PQY 17-2530 kit is aimed at builders and modifiers of dune buggies, rat rods, sand rails, hot rods, and custom trikes who need a clean external fuel fill solution. It’s best for people comfortable with basic fabrication—cutting, welding, and hose routing—or those working with a fabricator who can install the bracket and finalize hose connections. If you want a compact, durable external fill system with a billet-cap look and a 2" hose interface, this kit provides the core components to complete that upgrade.