QWORK 2T Cable Grip Wire Rope Jaw Puller — 4,408 lb Safe Load, Alloy Steel, Fits 5/32"–7/8"

This QWORK wire rope jaw puller is built for contractors, linemen, and DIYers who need a reliable clamping tool to adjust overhead lines, remove cable slack, or tension guy wires. Constructed from high-strength alloy steel and fitted with an anti-chip safety device, the clamp reduces slippage while minimizing damage to the cable surface. The jaw accommodates cables from 5/32" up to 7/8", making it versatile for a wide range of steel rope sizes.

How does this clamp help when adjusting sagging overhead lines?

The QWORK cable grip provides a firm, temporary hold on a cable so you can take up slack and retension lines safely. Its serrated jaw and smooth tong design work together to reduce slipping while limiting surface abrasion to the conductor or steel strand. Use it with a suitable winch or come-along to apply steady pulling force without crushing the rope.

• 2,200 kg (4,408 lb) maximum safe load for controlled tensioning
• Serrated jaw for positive grip combined with smooth tong to protect cable
• Fits cable diameters 5/32"–7/8" for broad applicability

What safety features are built into the QWORK wire rope puller?

Safety is built into the clamp through an anti-chip device at the mouth and a robust alloy-steel body that resists deformation under load. The anti-chip device helps prevent sudden release or jumping of the cable when under tension, while the solid construction lowers the risk of clamp failure during typical pulling tasks.

• Anti-chip safety device at the clamp mouth to reduce sudden slip
• High-quality alloy steel resists bending and wear under load
• Smooth tong surfaces to limit cable damage and frayed strands

Which cable sizes and job types are suitable for this jaw puller?

This clamp is sized to work with steel cable and wire rope from 5/32" (about 4 mm) up to 7/8" (about 22 mm). It’s appropriate for general tensioning and pulling duties such as overhead line adjustment, guy-wire tightening, and other rigging tasks where a temporary, strong grip is needed. Always pair with rated rigging hardware and follow safe working practices for overhead operations.

• Compatible with steel cables and wire rope 5/32"–7/8" diameter
• Suitable for line tensioning, guy-wire adjustment, and pulling tasks
• Use with rated winches, come-alongs, and certified slings or shackles

How should I use and maintain the QWORK cable grip to extend service life?

Inspect the clamp before each use for wear, deformation, or damaged components, and ensure the anti-chip device functions smoothly. Clean off grit and lubricate pivot points occasionally to prevent corrosion and stiffness. Store in a dry place and never exceed the 4,408 lb maximum safe working load.

• Perform pre-use inspection for cracks, wear, or bent parts
• Keep pivot points clean and lightly lubricated to maintain movement
• Store dry and do not exceed rated 2-ton (4,408 lb) load

Who is this for: The QWORK 2T Cable Grip Wire Rope Jaw Puller is aimed at electrical contractors, utility crews, fence installers, mast and antenna technicians, and serious DIYers who need a compact, dependable clamp for pulling and tensioning steel cables. If you regularly work with overhead lines, guy wires, or wire-rope assemblies and require a durable tool that balances strong grip with cable protection, this QWORK clamp is a practical addition to your rigging kit.