RAPTOR 2K Urethane Bed Liner Kit — 4 Quart Tintable DIY Spray-On, UV-Resistant Protective Coating

RAPTOR U-POL Tintable 0821V is a DIY 2K urethane bed-liner kit that sprays, rolls, or brushes on to create a durable, UV-resistant protective coating for truck beds and many other surfaces.

This complete four-quart kit ships ready for homeowner or professional use: four 24 oz. tintable urethane bottles plus one 32 oz. hardener. Mix at the simple 3:1 ratio, apply through the included spray gun or use a roller/brush for different textures, and expect a fast dry time with a full cure in about a week. The formula is 50-state VOC compliant and designed to bond to properly prepared metal, painted panels, aluminum, fiberglass, concrete, and wood.

How much area will one 4-quart kit cover?

One four-quart RAPTOR kit covers roughly 125 square feet when applied at typical spray-on thickness, which is usually enough for a standard 6-foot truck bed. Coverage changes with texture preference and surface porosity: heavier, more textured coats will use more material.

• Approximate coverage: 125 sq. ft. per gallon / per kit as packaged.
• Standard 6-ft truck bed typically covered by one kit.
• Increase kits for thicker textures, larger trucks, or additional components (tailgate, step rails).

Which surfaces can this urethane coating be applied to?

The RAPTOR 0821V bonds to many substrates after proper preparation, making it versatile for vehicle and non-vehicle projects. It adheres best to sanded OEM paint, bare metal, aluminum, fiberglass, prepped concrete, and properly prepared wood.

• Truck beds, tailgates, and rocker panels.
• Trailers, boat decks, garage floors, and off-road equipment.
• Use recommended surface prep: clean, sand, and remove rust or contaminants before application.

Is the kit suitable for DIY users and what tools are needed?

The kit is designed for DIY use: add the supplied hardener to each tintable bottle, shake thoroughly, then spray with the included bed-liner gun. You can also achieve different finishes with a roller or brush; for best spray results a compressor capable of about 8 CFM at 50–60 PSI is recommended.

• Included: four 24 oz. tintable urethane bottles and one 32 oz. hardener, plus a spray gun.
• Mix ratio: simple 3:1 — add 8 oz. hardener per bottle then shake.
• Application options: spray for textured finish, roller/brush for smoother coat.

How long before the surface can be used and will it hold up outdoors?

The coating is dry to the touch in about an hour, supports light use after 2–3 days, and reaches full mechanical and chemical resistance in approximately 5–7 days. It contains UV-resistant components to reduce fading and maintain color and finish when exposed to sun, rain, and snow.

• Touch dry: ~1 hour under normal conditions.
• Light use: 2–3 days; full cure: 5–7 days.
• UV/weather resistance helps preserve appearance outdoors.

Who is this for: RAPTOR U-POL Tintable 0821V is meant for vehicle owners, DIY enthusiasts, fleet managers, and tradespeople who need a resilient, tintable protective coating that’s easy to apply and compliant with VOC rules across the U.S. Choose this kit if you want a sprayable, textured finish that bonds to a wide range of surfaces, or if you prefer control over texture and color while keeping application accessible for nonprofessionals.