ReluxGo MacPherson Strut Coil Spring Compressor, 2-Piece Heavy-Duty Set — 10.6" Reach, Dual Drive (1/2" Drive & 13/16" Socket)

The ReluxGo Macpherson Strut Spring Compressor is a two-piece, heavy-duty tool set designed to safely compress coil springs on MacPherson strut assemblies for routine suspension work.

This professional-grade compressor set gives DIY mechanics and technicians a wide-range, secure gripping solution for most small and medium passenger vehicles. Built from heat-treated 45# steel with drop-forged hooks and locking pins, the ReluxGo kit adapts to 1/2" square drives or 13/16" hex sockets so you can use either a ratchet, breaker bar, or power tool. The extended 10.6-inch reach of the Acme rods and wide end pieces accommodates a broader span of spring diameters than many competing models.

How does this tool secure and hold a coil spring during compression?

The ReluxGo compressors use wide end pieces that clamp around the spring coils and reinforced drop-forged hooks to prevent slippage. Locking pins add an extra layer of safety by holding the assembly at preset positions while you work.

• Wide end pieces distribute pressure evenly across coils to reduce damage.
• Drop-forged hooks resist bending under high tension.
• Locking pins allow staged compression and secure positioning.
• Works with hand or power tools for controlled tightening and release.

What vehicles and strut types are compatible with this compressor set?

Designed for MacPherson strut springs, this set fits most small and medium-sized cars that use this common suspension layout. The extended 10.6" range covers many coil diameters and spring lengths found on passenger vehicles.

• Compatible with most MacPherson strut springs on compact and mid-size cars.
• Range and hook design suit varied coil diameters and pitch patterns.
• Not intended for large commercial or heavy-duty truck springs without confirming fit.
• Check vehicle-specific service manual for recommended compressor specifications.

Why choose ReluxGo’s construction and drive options for spring work?

ReluxGo combines heat-treated 45# steel and Acme-thread rods to provide durable, reliable compression under load. The tool accepts a 1/2" square drive or 13/16" hex socket, giving you flexibility to use manual or powered drive tools safely.

• 45# heat-treated steel for strength and longer service life.
• Acme rods reduce binding and improve thread engagement under tension.
• Dual-drive compatibility for ratchets, breakers, or impact tools (use impact-rated tools carefully).
• Extra-wide 10.6" range works with more spring sizes than typical kits.

How should I use and maintain the compressor for safe, long-lasting performance?

Use matched pairs and compress springs evenly, watching the locking pins and hooks for proper engagement. After each use, clean and lightly lubricate threads, inspect for bends or wear, and store the set in a dry place to prevent corrosion.

• Always compress springs evenly and in small increments to maintain control.
• Engage locking pins before removing your drive tool for added security.
• Inspect hooks and rods for deformation; replace any worn components immediately.
• Clean threads and apply anti-seize or light oil to extend thread life.

Who is this for: The ReluxGo Macpherson Strut Spring Compressor is aimed at experienced DIY mechanics, independent shops, and professional technicians who perform suspension repairs on passenger cars. It’s best for users familiar with spring compression safety practices and vehicle-specific procedures; if you’re new to strut work, follow the vehicle manual or seek professional training before attempting repairs.