Rexka Wheel Well & Fender Flare Retainer Kit 46pcs for Nissan/Infiniti — OEM-style Nylon Clips

Rexka’s 46-piece wheel well and fender-flare retainer kit supplies the exact nylon clips and grommets used on many Nissan and Infiniti models so you can replace broken fasteners quickly and restore a factory fit.

This comprehensive kit bundles four common OEM-style retainers — black push rivets, yellow moulding clips, gray screw grommets, and white fender moulding pins — chosen to match part numbers used across Armada, Juke, Murano, Rogue and several QX-series vehicles. Each component is injection-molded nylon sized to fit specified factory hole diameters and screw threads, letting you repair liners, splash shields and flare attachments without hunting down single parts.

Which vehicles and part numbers does this kit fit?

These retainers are matched to Nissan and Infiniti part references commonly used from the early 2000s through 2019. Check the fit list below against your vehicle year and location of the fastener before installation.

• Replaces 01553-09321: black push-type retainer; fits many 2004–2019 Armada, Juke, Murano, Rogue models and QX50/QX56/QX80 ranges.
• Replaces 76847-JG00A: yellow moulding clips for Juke, Murano, Rogue and QX models for specific years.
• Replaces 76848-JG00A: gray screw grommets sized for M6.3 screws used on wheel well liners and flares.
• Replaces 76882-JG10A: white fender moulding pins for liner and trim retention on select years.

How do these individual clips differ and where are they used?

Each clip in the kit has distinct head and stem dimensions designed for particular attachment points such as splash shields, fender flares or interior liner flanges. The colors and sizes help you identify the correct retainer for its original location.

• Black push retainer: 20mm head, 9mm stem, fits 8mm hole — common for bumper covers and splash shields.
• Yellow moulding clip: 8×17mm head, 12mm stem — used along wheel well mouldings and trim edges.
• Gray screw grommet: M6.3 screw size, 12mm×16mm head — secures flares and liner screws.
• White moulding pin: 6×12mm top head, 16mm bottom head, 10mm stem — holds decorative trim and inner liners.

Can I install these clips myself and what tools are helpful?

Yes — most retainers press or screw in by hand with minimal tools. For faster, damage-free removal and installation, use a clip removal tool, small trim pry, or a screwdriver for the screw grommets; pliers help with stubborn pins.

• Push clips: press firmly into clean holes until the head seats flush.
• Screw grommets: align grommet then thread the appropriate M6 screw until snug, not over-tightened.
• Moulding pins: push into the panel hole and snap the head to secure.
• Removal tip: use a panel removal tool to pry up heads without tearing trim.

What should I check before ordering to ensure compatibility?

Measure the hole diameter, head size, and stem length of the worn fastener on your vehicle or compare the OEM part number. Confirm the model years listed for each clip variant to match your specific Nissan or Infiniti year and trim location.

• Verify OEM part numbers: 01553-09321, 76847-JG00A, 76848-JG00A, 76882-JG10A.
• Match hole size (e.g., 8mm) and screw size (M6.3) shown in the specs.
• Count required clips per vehicle area; this kit includes 46 pieces total.
• Inspect the damaged clip to choose the correct color/shape replacement.

Who this kit is for: Automotive DIYers, body-shop technicians and owners of compatible Nissan or Infiniti vehicles who need a mixed set of OEM-style retainers for fender flares, wheel wells, splash shields and interior trim. If you prefer keeping replacement fasteners on hand for routine repairs or restoring factory fitment after collision or maintenance, this Rexka assortment covers common clip types used across multiple years and models.