RVMATE RV Water Pressure Regulator — Lead-Free Brass, 3/4" Hose/NH Thread with Gauge & Adjustable Dial

RVMATE RV Water Pressure Regulator is an adjustable, lead-free brass valve that protects your camper’s plumbing by controlling incoming water pressure.

Connecting to a campground or home water supply without a regulator risks damaging RV pipes, fittings, and appliances when pressure is too high. The RVMATE regulator mounts to standard 3/4" outdoor hose/NH threads, shows pressure on a clear gauge, and lets you dial the outlet pressure to a safe level for RV systems. Built from lead-free brass and supplied with filters, washers, and PTFE tape, it’s designed for regular outdoor use and quick setup.

How does the adjustable dial and gauge help protect my RV plumbing?

The built-in gauge reads up to 160 PSI while the regulator’s top screw lets you lower the outlet pressure to the setting you need. This makes it easy to confirm incoming supply pressure and then dial the regulator down to a safe range for hoses, valves, and fixtures. The visible gauge and rotating pointer give immediate feedback when you change settings.

• Gauge range: 0–160 PSI for quick supply assessment
• Factory preset: approximately 45 PSI for typical RV systems
• Simple adjustment: turn the top screw to increase or decrease output pressure

Will this fit my park water hookup and garden hose?

Yes — the RVMATE regulator is made for standard 3/4" outdoor hose threads and NH fittings used at campgrounds and residential spigots. Its compatibility makes it useful for both protecting RV plumbing and controlling pressure for garden watering or other outdoor connections.

• Connects to common 3/4" hose/NH threads found at parks and homes
• Works equally well for RV supply lines and garden hose tasks
• Robust outdoor construction tolerates regular hookup and storage

Is the regulator safe and durable for drinking water lines?

The housing is machined from lead-free brass and meets strict lead-content requirements, keeping lead well below the NSF/ANSI 372 limit. That construction provides corrosion resistance and long-lasting service for potable water connections when installed correctly.

• Lead content under 0.13%, compliant with NSF/ANSI 372 standards
• Brass body resists rust and handles outdoor conditions
• Includes replaceable filter pieces to reduce debris entry

What accessories come with the regulator and how do I install it?

Each RVMATE unit ships with three mesh filter pieces, three hose washers, and a roll of PTFE tape to speed installation and help ensure a leak-free seal. Installation is straightforward: wrap threads with the provided PTFE tape, insert a washer, thread onto the supply spigot, and adjust the regulator to the desired outlet pressure while watching the gauge.

• Included: 3 filters, 3 washers, 1 roll of PTFE tape
• Installation: apply tape, fit washer, hand-tighten, then adjust screw as needed
• Maintenance: periodically clean or replace filter pieces and check the gauge

Who this is for: RVMATE’s regulator is for RV owners, towable-trailer users, and outdoor gear enthusiasts who want a dependable way to control water pressure at campgrounds or home spigots. It suits anyone who needs an adjustable, lead-safe valve with a visible gauge and the included accessories to install and maintain a secure, low-pressure supply for plumbing and appliances.