Saree 4-Lug 2000 lb Trailer Hub Kit 4x4" – Fits 1"/1-1/16" Straight Spindles, Black Coated 2-Pack

Saree 4-lug hub kit is a complete 2000 lb-rated trailer hub assembly for straight spindles, supplied as two full hub sets including bearings, seals, dust caps and lug nuts.

This dual-pack hub kit is built for light trailers and boats that use 4×4" 4-bolt hubs and straight spindles of either 1" or 1-1/16" diameter. Each kit ships with both bearing sizes, two grease-seal sizes, dust caps and hardened lug nuts so installers can adapt the hub to the correct spindle diameter without extra shopping. The hubs are black coated and salt-spray tested for corrosion resistance, and critical parts meet common US manufacturing standards for durability and fit.

Will these hubs fit my trailer spindle?

These hubs are designed specifically for straight spindles only — they will not adapt to tapered spindles. The kit includes L44643 bearings for 1" spindles and L44649 bearings for 1-1/16" spindles, plus two grease-seal inner diameters to match each size so you can fit either spindle diameter without additional parts.

• Fits 1" and 1-1/16" straight spindles (not tapered)
• Includes L44643 (1" ID) and L44649 (1-1/16" ID) bearings
• Two grease seals: 1.25" ID and 1.5" ID (O.D. 1.98")
• Sold as 2 complete hub kits for dual-axle setups or spares

What parts come in each 2-set package?

The package supplies everything needed to install two 4-lug hubs on a trailer axle rated to 2,000 pounds per axle. It’s intended as a near-complete hub replacement kit, though castle nuts are not included.

• 2 hub kits (4-lug, rated 2,000 lbs each)
• 4 L44649 bearings and 4 L44643 bearings (total of 8 bearings)
• 8 lug nuts (1/2"-20 thread) and 4 dust caps (O.D. 1.98")
• 2 cotter pins (2.3" long) and 4 grease seals (two sizes)

How durable and corrosion-resistant are these hubs?

Saree hubs are manufactured to a high standard and undergo coating and corrosion testing to extend service life in marine and road environments. The hubs feature a black protective coating and components such as dust caps are galvanized for added wear resistance.

• Black-coated finish with 96-hour salt spray testing
• Galvanized dust covers to resist wear and rust
• Lug nuts hardened to 10.9 to reduce fracture risk
• High-quality bearing steel for lower noise and friction

How should I prepare for installation?

Before mounting, confirm your spindle is straight (not tapered) and measure its diameter to choose the correct bearing and seal from the kit. Gather the required tools and, if replacing hubs on both sides, use the included parts to rebuild one axle at a time for safety and alignment.

• Verify spindle type and measure diameter (1" or 1-1/16")
• Have castle nuts and grease gun (not included) ready
• Install bearings, seals and torque lug nuts to manufacturer specs
• Replace one side at a time for controlled alignment

Who is this for: This Saree dual-hub kit is aimed at owners of small trailers, utility trailers and boat trailers needing a reliable 2,000 lb-rated hub replacement that fits straight spindles of 1" or 1-1/16". It's also useful for DIY installers and small shops that value a complete parts set — bearings, seals, dust caps and lug hardware — packed to protect components during shipping.