Saree 5-Lug 2000 lb Trailer Hub Kit 5x4.5 — 2-Hub Set for 1"/1-1/16" Straight Spindles, Bearings & Caps

A pair of Saree 5-bolt trailer hub assemblies rated for 2,000 lb axles, built to fit 1" and 1-1/16" straight spindles only.

This complete two-hub kit supplies the parts needed to update or replace hubs on small utility, boat and light-duty trailers with 5x4.5 bolt pattern axles. Each set is made to American dimensional standards and ships with bearings, seals, dust caps and lug nuts so you can install both hubs without sourcing extra components. The hubs are powder-coated for corrosion resistance and tested to resist salt spray, and the package is arranged to minimize transport damage.

How do these hubs accommodate different spindle diameters?

The kit includes both L44643 and L44649 bearing sets to fit 1" and 1-1/16" straight spindles respectively, along with two sizes of grease seals. This dual-bearing approach lets the hubs be used interchangeably on trailers that have either straight spindle measurement.

• Includes 4 L44643 bearings (for 1" ID spindles).
• Includes 4 L44649 bearings (for 1-1/16" ID spindles).
• Contains grease seals for 1.25" and 1.5" inner diameters.
• Designed for straight spindles only — not compatible with tapered spindles.

What hardware and finish come with the hub kit?

Each purchase includes the hardware required to mount and protect the hubs: lug nuts, dust caps, cotter pins, and multiple seals. The hub bodies are black-coated, and dust caps are galvanized to resist wear and corrosion in wet environments.

• 10 lug nuts (1/2"-20 thread) supplied per two-hub set.
• 4 galvanized dust caps (O.D. 1.98") included for wheel protection.
• Cotter pins and two sizes of grease seals for proper assembly.
• Black corrosion-resistant hub coating and 96-hour salt spray testing.

How does this kit address durability and safety concerns?

The hubs are produced to a high standard with attention to strength, rigidity and heat dissipation to support long service life under typical trailer loads. Critical fasteners meet a 10.9 hardness rating to reduce the risk of hardware failure, and bearings are made from high-quality steel to limit noise and friction.

• Produced to US G3000-style dimensional standards for fit and durability.
• Lug nuts rated at 10.9 hardness to resist fracture.
• Bearing materials and finishes chosen for lower friction and noise.
• Salt-spray-tested coating and galvanized dust caps to reduce corrosion.

What exactly is included in the box?

The kit ships as two independent hub assemblies in protected packaging and includes the bearings, seals, caps and nuts needed to mount both hubs on a 2,000 lb axle. Castle nuts are not included, so plan to use existing axle hardware or purchase separately if required.

• 2 hub assemblies (5-lug, 4.5" bolt circle) rated for 2,000 lb axles.
• 4 L44649 bearings and 4 L44643 bearings (covering both spindle sizes).
• 2 grease seals (O.D. 1.98" x I.D. 1.25") and 2 grease seals (O.D. 1.98" x I.D. 1.5").
• 10 lug nuts (1/2"-20), 4 dust caps, 2 cotter pins; castle nuts not included.

Who is this for? This Saree two-hub kit is intended for owners of small trailers, boat trailers and utility trailers that use 5x4.5 bolt pattern hubs and straight spindles measuring either 1" or 1-1/16". It’s useful for DIY mechanics, fleet maintenance, and anyone replacing worn or corroded hubs who needs a complete hardware set and corrosion-resistant finishes. If your trailer uses tapered spindles or requires castle nuts supplied, confirm compatibility before purchasing.