SCITOO Air Conditioner Compressor for Honda Accord 2.4L 2013-2017 — Direct-Fit, Prefilled PAG46 Oil

SCITOO Air Conditioner Compressor replaces the factory unit on Honda Accord 2.4L models (2013–2017) to restore strong, quiet cooling with a prefilled PAG46 oil clutch assembly.

If your Accord’s air conditioning is weak, noisy, or the compressor clutch has failed, this SCITOO direct-fit compressor is built to match the original equipment's mechanical and mounting points while offering a fully assembled clutch and 130 ml of prefilled PAG46 oil. The unit uses the 10SRE18C compressor type, a 7-groove 120 mm pulley, and an aluminum alloy housing designed for long-term service in the factory cooling loop.

Will this compressor fit my Honda Accord 2.4L from 2013 to 2017?

Yes — the part is designed to replace OE-style compressors used in Accord 2.4L models spanning 2013 through 2017. Confirm fit by matching OE numbers or comparing mounting points and pulley grooves before purchase.

• Compatible years: 2013, 2014, 2015, 2016, 2017
• Common OE numbers referenced: 14-1230, 198303, 5513126, 6513126, 197303, 7513126
• Direct-fit mounting and electrical connector for most factory setups

How is the compressor prepped for installation and what do I need to add?

The SCITOO compressor arrives with 130 ml of PAG46 oil already inside, so you won’t need to oil the compressor before the first installation. You will, however, need to evacuate and recharge the AC system with the correct refrigerant to approximately 70–80% of system capacity, and follow service best practices.

• Oil: PAG46, 130 ml prefilled — no oil addition for first install
• Refrigerant: evacuate, vacuum, then charge to ~70–80% specified capacity
• Recommended: flush system and replace receiver/drier or accumulator before installation

What are the key mechanical and performance features?

This unit uses the 10SRE18C compressor design with a 7-groove pulley and 120 mm diameter to match factory drive characteristics. The aluminum alloy body reduces weight and helps dissipate heat while the included clutch assembly is balanced for low vibration and quieter operation.

• Compressor type: 10SRE18C for factory-like performance
• Pulley: 7 grooves, 120 mm diameter for correct belt alignment
• Material: aluminum alloy housing for corrosion resistance and heat transfer
• Clutch included and balanced to minimize noise and vibration

Any installation cautions or maintenance tips I should know?

To protect the new compressor, clean or flush the AC lines to remove metal shavings and debris from the failed unit. Install a new receiver/drier or accumulator and confirm electrical connectors and belt alignment before startup to avoid premature failure or contaminants circulating in the system.

• Flush cooling lines to remove sundries or metal shavings
• Replace receiver/drier or accumulator when installing a new compressor
• Check belt tension, mounting bolts, and electrical connections carefully

Who is this for: This SCITOO replacement compressor suits do-it-yourself mechanics and professional technicians working on Honda Accord 2.4L (2013–2017) models who need a direct-fit, fully assembled compressor with the correct pulley, clutch, and factory-style PAG46 oil fill. It’s ideal when you want a ready-to-install unit that mirrors OE fitment and reduces downtime, provided the rest of the AC system is inspected and serviced during replacement.