SEHNSUCHT Trailer Axle Electric Brake Kit — Pair 12" x 2" brakes, 8-on-6.5" drums, bearings & seals

This kit combines two electroplated iron brake drums with a matched pair of 12" x 2" electric brake assemblies plus all bearings, seals, fasteners and dust caps needed for a full replacement. Built for standard lube axles and compatible with many Dexter-style setups, the package is intended to restore stopping performance on medium-duty trailers while resisting rust and wear in road conditions.

What components come with the kit and why does each matter?

The kit ships with everything required to replace both hub/drum assemblies and install the electric brakes, minimizing trips to the parts store. Bearings and seals retain lubrication and prevent contamination, while the plated drums offer corrosion resistance for longevity.

• 2 x 12" x 2" brake drums (8 on 6.5" bolt pattern) with electroplated finish
• 2 x electric brake assemblies (left and right) sized to match the drums
• Replacement bearings, oil seals, dust covers and rubber plug caps
• Complete fastener set: nuts, bolts, washers, cotter pins and spring washers

How does this kit fit my trailer axle?

The drums use an 8-on-6.5" bolt circle and are intended for standard-lube axles on trailers rated around 5200 to 7000 lb. Before purchasing, confirm your axle uses a conventional hub flange (not Nev-R-Lube) and measure the brake flange to ensure compatibility.

• Fits 8 on 6.5" bolt pattern hubs common on many 5200–7000 lb trailers
• Designed for standard-lube axles; not compatible with Nev-R-Lube or some Airstream Classic post-2005 axles
• Brake flange measurement required—dust cap must be installed by gently hammering into place

What performance and durability features should I expect?

The drums are cast from iron and finished with electroplating to improve corrosion resistance, helping maintain braking response over time. The electric brakes are matched to the drum size to provide reliable actuation during towing when wired to a compatible brake controller.

• Electroplated drum surface for increased rust resistance and longer service life
• Classic drum design tuned for quick response under heavy loads
• Manual-adjust-style hardware included so you can set shoe clearance correctly

What should I know about installation and ongoing maintenance?

Installation requires basic mechanical skills and the proper tools to remove hubs and bearings, press in seals, and torque wheel nuts correctly. After installation, follow routine inspection intervals for bearing lubrication, brake shoe wear, and electrical connections to ensure safe towing.

• Requires measuring brake flange and standard hub removal tools
• Dust caps are seated by tapping; ensure proper seal to keep contaminants out
• Regularly check bearing play, brake shoe wear, and wiring to the brake controller

Who is this for: This SEHNSUCHT kit is aimed at trailer owners, repair shops, and DIY mechanics who need a full hub/drum and electric brake replacement for 5200–7000 lb axles using a standard lube setup. If you tow utility, boat, equipment, or cargo trailers with an 8-on-6.5" hub pattern and want a corrosion-resistant drum plus matched electric brakes and installation hardware, this kit provides a consolidated, ready-to-install solution.