SONAX Cut & Finish 1000ml car polish — P1500 sanding mark removal, high cut and gloss, long working time

SONAX Cut & Finish is a high-abrasion, silicone-free polishing compound that removes P1500 sanding marks, overspray and water spots while leaving a high-gloss finish in one step.

Designed for automotive paint correction after sanding or bodywork, SONAX Cut & Finish combines aggressive cutting power with a refined shine and an extended working time. The formula targets common surface defects — like dust nibs, overpaint and sanding grooves — without excessive dust or stubborn residues. It’s optimized for both machine polishing and careful hand application when paired with the recommended SONAX polishing pads.

How quickly does this polish remove sanding marks and overspray?

SONAX Cut & Finish is formulated to tackle medium-to-heavy surface defects rapidly. On primer and clearcoat prepared with P1500 abrasive, it smooths sanding grooves and reduces visible overspray in significantly fewer passes than mild polishes.

• Effective on P1500 sanding marks and light primer irregularities
• High-abrasion slurry speeds correction without multiple compounds
• Works with rotary or dual-action polishers for faster results

Will it leave a glossy finish or require a second polish?

This compound delivers both cutting performance and gloss in the same application, minimizing follow-up steps. After removing defects, the remaining residue wipes off cleanly to reveal a polished surface with notable clarity and shine.

• Rated high for both cut and gloss performance
• Low-dust formula reduces cleanup time
• Residue designed for easy removal with a microfiber cloth

What pads and tools are recommended for best results?

For optimal performance use SONAX polishing pads: the red foam pad for general cutting and the lambskin pad for finishing touches. Both machine and controlled hand-polish methods are possible; choose pad aggressiveness based on the severity of the defect.

• Use SONAX red polishing pad (item 493100) for heavier removal
• Use SONAX lambskin pad (item 493141) for smoother transitions and fine finishing
• Dual-action or rotary polishers deliver consistent pressure and heat for faster correction

Is this product easy to work with for longer polishing sessions?

The formula was engineered with extended working time so it stays malleable during longer correction jobs without gumming up. That means you can maintain consistent polishing speed and technique across larger panels without frequent reapplication.

• Long open time prevents premature drying
• Silicone-free composition avoids transfer issues and contaminants
• Low-dust behavior keeps workspace cleaner and reduces buffing passes

Who is this for: SONAX Cut & Finish suits professional detailers, collision repair shops and informed DIYers who need a single-step solution for removing P1500 sanding marks, overspray and water spots while achieving a high-gloss surface. If you’re preparing repainted panels, correcting sanded clearcoat, or aiming to reduce polishing stages without sacrificing clarity, this product offers time-saving, high-performance results when used with appropriate SONAX pads and polishing equipment.