Specialty Products Company EZ Cam XR 14 mm Camber Alignment Bolts Pair — Steel, Gray Chromate

The Specialty Products Company 81260 Alignment Kit contains a pair of 14 mm EZ Cam XR camber replacement bolts in steel with a gray chromate finish, built to restore correct camber adjustment and corrosion resistance.

If you need to replace worn or damaged camber bolts without changing your factory alignment components, this kit gives you two OEM-style 14 mm EZ Cam XR bolts made from steel and finished in gray chromate. These bolts are sized and shaped to fit applications that use the EZ Cam XR design, allowing you to adjust camber angles accurately after suspension work or bolt wear. The package includes a matched pair so both sides can be renewed together, preserving consistent fit and torque characteristics.

What makes the EZ Cam XR 14 mm bolts different from standard camber bolts?

The EZ Cam XR design integrates a cammed face and alignment-friendly geometry that simplifies angle adjustments while maintaining secure clamping force. These bolts are engineered for repeatable positioning and reduced slippage during installation compared with generic fasteners.

• 14 mm shank diameter sized for common suspension mounting holes
• Cam-shaped head profile for precise lateral movement during adjustment
• Steel construction for strength under torque and load
• Gray chromate finish for improved corrosion resistance and lubricity

How do I use these replacement bolts when reassembling suspension parts?

Install the bolts into the original mounting points, align the cam face to set the initial camber, then torque to manufacturer specifications. After the vehicle is on the ground, fine-tune the camber as needed following alignment procedures or at a shop to ensure tire wear and handling are optimized.

• Hand-start bolts into the threaded holes to avoid cross-threading
• Rotate cam head to achieve the desired lateral offset before final tightening
• Tighten to recommended torque values and recheck after test driving

Will these bolts resist rust and wear in road conditions?

The gray chromate coating provides a protective layer against corrosion and reduces galling during installation, though it is not a decorative chrome-plating. For heavy salt exposure or off-road use, consider additional corrosion protection or periodic inspection.

• Gray chromate offers sacrificial resistance to surface rust and oxidation
• Steel base ensures durability under shear and tensile loads
• Regular inspection advised for vehicles exposed to harsh environments

Can I replace a single bolt, or should I change both at once?

Replacing both bolts as a matched pair ensures symmetrical wear characteristics and identical torque response on each side of the axle. The 81260 kit supplies two bolts so both mounting points can be renewed together, which helps maintain even camber adjustment and balanced handling.

• Matched pair eliminates differences from mixed-new/used fasteners
• Helps maintain identical clamp load and alignment behavior left-to-right
• Recommended when one bolt shows wear, damage, or corrosive failure

Who is this for: The Specialty Products Company 81260 Alignment Kit is aimed at mechanics, restoration shops, and DIY enthusiasts who need a direct-fit replacement for EZ Cam XR camber bolts. It is ideal for anyone performing suspension work or alignment corrections who wants a durable steel bolt with a corrosion-resistant gray chromate finish supplied as a matched pair for consistent results.