SprayMax 2K Headlight Clear Coat — 7.1 oz UV-Resistant High-Gloss Restorer

SprayMax 2K 2in1 Headlight Clear Coat is a two-component spray that restores clarity to yellowed or scratched polycarbonate headlights and seals them with durable UV-resistant protection.

If your vehicle's headlights look foggy, yellowed, or scratched, this ready-to-spray product combines a built-in adhesion promoter with a hard clear coat to both repair and protect lenses. The aerosol is formulated for automotive polycarbonate lenses and offers a high-gloss finish that improves light output and resists environmental damage. Once you activate the can the usable pot life is roughly eight hours, and drying times are fast enough for same-night polishing and a long-lasting result when applied correctly. Note: this product contains chemicals listed under California Proposition 65.

How does SprayMax 2K restore cloudy or yellow headlights?

The 2K system lays down a bonding clear coat that fills minor scratches, evens out surface haze, and replaces the degraded protective layer that causes yellowing. It works best after surface prep (sanding/cleaning) to remove oxidation so the coating bonds uniformly.

• Two-component chemistry with built-in adhesion promoter for improved bonding
• Fills small scratches and smooths surface haze
• Formulated specifically for polycarbonate headlight lenses

What steps are required for a successful application?

Preparation is key: thoroughly clean and, if necessary, sand the headlight surface to remove loose oxidation and deep scratches. Activate the can, shake as directed, hold the fan nozzle about the recommended distance, and apply multiple thin coats for an even, durable film.

• Clean and degrease lens before starting
• Light sanding for persistent oxidation or deep scratches
• Activate can, shake well, spray several thin, overlapping passes
• Allow dust-dry in 15–20 minutes; touch-dry ~3 hours; polish after overnight cure

How long will the protection last and what does it protect against?

The cured coating provides a high-gloss finish and long-term protection against UV-induced fading, oxidation, road salts, and many car wash chemicals. Longevity depends on exposure and maintenance, but the UV-resistant formula significantly slows re-yellowing compared with untreated lenses.

• High gloss clarity (measured at 92 gloss units @ 20°)
• Blocks UV rays and reduces future oxidation
• Resists car wash chemicals and environmental contaminants

How fast does it dry and what are usable working times?

SprayMax 2K dries quickly for efficient restoration jobs: dust-free within 15–20 minutes and touch-dry in about three hours, with full handling and polishing ready after overnight curing. After activation the can’s pot life is approximately eight hours, so plan your application accordingly.

• Dust-dry: 15–20 minutes
• Touch-dry: ~3 hours
• Polishing/handling: overnight recommended
• Activated can pot life: ~8 hours

Who is this for: SprayMax 2K 2in1 Headlight Clear Coat is aimed at DIY enthusiasts, auto-detailers, and professional shops that need a compact, portable solution for headlight restoration. It suits anyone wanting a permanent-looking, UV-protective finish without specialized spray equipment — provided users follow recommended surface prep, application instructions, and safety precautions. Keep in mind the product includes chemical hazards referenced by California Proposition 65, so use appropriate ventilation, gloves, and eye protection during application.