TaskStar fuel transfer pump 12 GPM cordless battery-powered — 2 batteries, auto shut-off nozzle

TaskStar's cordless 12GPM fuel transfer pump is a portable, battery-powered system designed to move diesel, kerosene, or biodiesel quickly and safely without a power cord.

Whether you’re refueling tractors in the field, topping off a generator at a jobsite, or moving fuel between storage tanks, this ready-to-use kit delivers fast, cordless pumping with integrated safety features. The package includes two rechargeable batteries, hoses, nozzle, filter and accessories so you can start transferring fuel right away. Built around a copper motor and a 12-gallon-per-minute flow rate, the pump balances speed, lift capability and convenience for farm, marine, construction and mobile fueling tasks.

How fast and how far can this pump move fuel?

The TaskStar pump moves fuel at up to 12 gallons per minute, reducing refill times on large tanks and multiple machines. It can draw fuel from depths up to 16.4 feet and push fuel vertically to about 32.8 feet, covering most tank and transfer scenarios.

• Flow rate: 12 GPM for rapid transfers
• Suction lift: up to 16.4 ft from the fuel surface
• Discharge head: up to 32.8 ft for elevated delivery points
• Copper motor for reliable, sustained performance

What fuel types and applications are appropriate?

This pump is designed specifically for diesel, kerosene and biodiesel — it is not suitable for gasoline, water or alcohol. It suits farmers, mechanics, contractors and boat owners who need mobile refueling, tank transfers, emergency draining or on-site fueling.

• Accepted fuels: diesel, kerosene, biodiesel only
• Common uses: tractors, generators, boats, ATVs, construction equipment
• Environments: farms, campsites, remote job sites, marinas
• Not for gasoline, potable water, or alcohol-based liquids

How user-friendly and safe is the system?

TaskStar emphasizes portability and safety: the cordless design frees you from extension cords and the nozzle includes an auto shut-off that stops flow when the receiving tank is full. A pressure switch cuts power automatically for added protection, and the included inline filter helps keep contaminants out of your equipment.

• Cordless operation with two 4000mAh batteries for up to about 60 minutes continuous use
• Auto shut-off nozzle and pressure switch to prevent overfilling
• Inline filter to reduce particulates before delivery
• Comes with gloves and clamps to support safe handling and connections

What comes in the box and what maintenance does it need?

The kit is comprehensive: pump, inlet and delivery hoses, nozzle, filter, hose clamps, connectors, impellers, two 4.0Ah batteries, a charger and safety gloves. For reliable operation, charge batteries fully before first use, clean residual fuel from hoses after pumping, and adjust the pressure switch screw during initial setup as instructed.

• Complete kit: pump, hoses, nozzle, filter, batteries, charger and accessories
• Initial setup: charge batteries and adjust pressure switch screw once
• Routine care: flush and wipe hoses and nozzle after each use
• Storage: keep batteries charged and store in a dry, ventilated area

Who is this for? If you need a fast, portable solution to move diesel, kerosene or biodiesel without being tied to an outlet — and you value safety features like auto shut-off plus a complete out-of-the-box kit — TaskStar’s 12GPM battery fuel transfer pump is built for farmers, contractors, mariners and mobile service operators. It’s engineered to cut refueling time, handle common tank setups and arrive ready for immediate use, while clearly excluding gasoline and non-fuel liquids.