Taukealugs 3.0" 90° Silicone Elbow Coupler — 3" ID, 120mm Legs, 4-ply 5mm Wall with T-Bolt Clamps

The Taukealugs 90° 3.0" 4-ply silicone elbow coupler is a heavy-duty intercooler/turbo connection piece—3" ID, 120mm leg, 5mm wall thickness, supplied with T-bolt clamps.

This reinforced silicone elbow is built for pressurized intake systems where a durable, heat-resistant 90-degree transition is needed between turbo, intercooler, or intake piping. Constructed with four fabric plies and a robust 5 mm silicone wall, it balances flexibility and strength to resist collapse, tearing, and common under-hood temperatures while the included T-bolt clamps deliver a secure, leak-reducing seal.

How does this elbow perform under boost and heat?

The 4-ply reinforcement and thicker 5 mm wall give the elbow strong resistance to internal pressure and thermal cycling found in turbo systems. Rated to handle up to 2 MPa bursting pressure and a broad temperature range, it’s built to stand up to repeated stress without deforming.

• Inner diameter: 3.0" (76 mm) for high-flow compatibility
• Leg length: 120 mm on each side for compact piping runs
• Temperature range: -60°C to 230°C (-140°F to 428°F)
• Bursting pressure: 2 MPa for robust boost tolerance

Will it fit my turbo or intercooler plumbing?

The elbow is a universal-fit component intended for 3" piping systems. Its straight 120 mm legs provide enough insertion depth for typical coupler/clamp setups, but verify your piping dimensions and clearances before ordering.

• Designed for 3.0" ID pipework and universal 90° connections
• 120 mm leg length gives ample overlap with standard rigid pipe
• Comes with two T-bolt clamps sized to secure the silicone to metal tubing

How easy is installation and maintenance?

Installation is straightforward: slide the elbow onto each pipe end, position the clamps, and tighten. Silicone’s smooth interior reduces residue buildup, and the durable construction means minimal maintenance apart from occasional clamp checks.

• Clamps included for immediate installation
• Silicone surface is easy to clean and inspect visually
• Flexible enough for minor alignment adjustments without tools

What durability and safety features should I expect?

With four reinforcement layers and a thick wall, the coupler resists pinching, kinking, and abrasion better than thinner single-ply hoses. The wide operating temperature window protects against cold cracking and high-heat softening in engine bays.

• 4-ply construction resists burst and puncture
• 5 mm wall thickness adds structural stability under load
• High/low temperature tolerance reduces environmental failure modes

Who is this for: Automotive enthusiasts, tuners, and mechanics who need a dependable 90° silicone transition for 3" intake or intercooler systems. It suits custom piping projects, replacement of aging couplers, or upgrades where higher pressure and temperature resilience are required. Always confirm piping diameter and available clearance before installation; professional fitting is recommended for high-boost applications.