TERLIGSK 2" Fuel Filler Neck Hose 45° 15 7/8" Long — Reinforced Nitrile, Includes 4 Clamps

TERLIGSK gasoline fuel filler neck hose is a reinforced 2-inch inside-diameter, 45° angled fuel filler hose (15 7/8" long) supplied with four hose clamps for a reliable tank-to-filler connection.

This replacement filler neck hose is designed for vehicles and equipment that need a durable, flexible connection between the gas tank and the filler neck. Built with a nitrile tube and internal nylon cording, the hose resists common fuels and stays flexible from -40°F to +212°F (-40°C to +100°C). It arrives cut to 15 7/8" overall length and includes four stainless steel-style clamps so you can fit and secure it right away.

How does this hose handle fuel exposure and temperature swings?

The TERLIGSK filler neck hose uses a nitrile inner tube formulated for fuel resistance and a reinforced body to resist collapse and kinking. Its working temperature range covers very cold starts and hot operating environments encountered in street and off-road use.

• Nitrile tube resists gasoline and common petroleum blends.
• Internal nylon cording adds tensile strength and prevents stretching.
• Rated for -40°F to +212°F (-40°C to +100°C) for wide climate use.

Will this hose fit my vehicle and how do I measure for compatibility?

The hose has a 2" inside diameter and is supplied at 15 7/8" long—measure the old filler hose from tank outlet to filler neck to confirm fit. If you need a different length, the material is easy to trim with a utility knife so you can tailor it precisely.

• 2" (50.8 mm) inside diameter standard for many filler necks.
• Length: 15 7/8" (measured along the hose) — trim-to-fit friendly.
• Flexible 45° angle simplifies routing in tight quarters.

How simple is installation and what’s included in the kit?

Installation is straightforward: slide the hose onto the tank outlet and filler neck, position the clamps, and tighten. The hose's flexibility makes it easy to route and cut; the bundled clamps let you secure both ends immediately without sourcing extra hardware.

• Comes with four hose clamps for secure connections.
• Very flexible — can be trimmed to exact length with a box knife.
• 45° angle helps align filler necks without stress on fittings.

What durability and maintenance should I expect?

The reinforced construction resists abrasion and internal collapse while the nitrile inner tube reduces degradation from fuel contact. Routine visual checks and clamp re-tightening after initial use will keep the assembly leak-free and serviceable for years under normal conditions.

• Reinforced with nylon cording for added tensile strength.
• High-quality materials reduce swelling and softening from fuels.
• Inspect clamps and hose ends periodically; re-tighten as needed.

Who is this for: This TERLIGSK filler neck hose is made for DIY mechanics, restoration shops, and fleet maintainers who need a robust, easy-to-fit replacement for worn or damaged fuel filler connections. It suits cars, trucks, ATVs, tractors, generators, and other equipment that accept a 2" ID filler hose and benefit from a reinforced, trim-to-fit solution with included clamps.