TKKEUEP Fuel Filler Neck Hose 2 in ID, 15 7/8 in Long — reinforced nitrile construction, includes 4 hose clamps

TKKEUEP reinforced gasoline fuel filler neck hose is a straight, 2-inch inside diameter replacement hose (15 7/8" long) supplied with four hose clamps for a secure, EPA-compatible fuel line connection.

This replacement fuel filler neck hose is built for durability and straightforward installation. Constructed with a nitrile inner tube and nylon cording reinforcement, the hose resists common automotive chemicals while remaining flexible enough to route from the fuel tank to the filler neck. It fits a wide range of gasoline applications where a 2" inside diameter and the supplied length are appropriate, and the included clamps make it ready to secure on arrival.

What materials make this hose suitable for gasoline use?

The hose features a nitrile rubber (NBR) inner tube that offers chemical compatibility with gasoline and many blended fuels. Nylon cording inside the hose gives tensile strength so the line resists kinking and collapse while remaining flexible for routing.

• Nitrile inner tube resists oil and gasoline exposure.
• Nylon reinforcement adds structural strength and kink resistance.
• Temperature range from -40°F to +212°F covers typical automotive conditions.
• Manufactured to withstand concentrations permitted under EPA fuel standards.

How long is the hose and will it fit my vehicle?

This hose measures 15 7/8" long with a 2" inside diameter — measure your current filler neck hose to confirm fit. It’s supplied as a straight section intended for many fuel filler neck routes; if necessary it can be trimmed to length for a custom fit.

• Overall length: 15 7/8" (trim-to-fit friendly).
• Inside diameter: 2" — matches many filler neck systems and adapters.
• Trim with a sharp utility knife for clean cuts and ease of installation.
• Four hose clamps included for secure, leak-resistant connections.

How easy is it to install and maintain?

Installation is straightforward: slide a clamp onto each hose end, push onto the filler neck and tank pipe, then tighten the clamps. The hose’s flexibility simplifies routing, and routine inspection of clamps and hose surfaces is all that’s typically needed to maintain a secure connection.

• Flexible construction makes routing simple in confined spaces.
• Pre-supplied clamps eliminate extra purchases and speed installation.
• Trim-to-fit capability adapts to many vehicle layouts.
• Periodic clamp checks and visual inspection prevent leaks.

Is this hose compatible with different fuel systems and climates?

The nitrile tube and reinforcement are compatible with gasoline and many ethanol-blended fuels encountered in modern vehicles. With a rated temperature range from -40°F to +212°F, it performs in a wide span of climates, though extremely hot engine-bay contact should be avoided.

• Works with gasoline and common ethanol blends within EPA limits.
• Temperature rating supports cold starts and warm operating conditions.
• Not intended for prolonged direct contact with extreme heat sources.
• Suitable for use as filler neck, vent hose, or general fuel line where size matches.

Who is this for? Mechanics, DIY vehicle owners, and fleet maintenance teams needing a reliable, easy-to-install fuel filler neck replacement will find this TKKEUEP hose useful. It’s ideal when you require a straight 2" ID section with enough length to span from tank to filler cap, plus the convenience of included clamps. If your application calls for a different diameter, length, or a molded filler neck, choose a product matched to those specific requirements.