TKKEUEP Gasoline Fuel Filler Neck Hose 1.5" ID 15.9" Long with 4 Clamps — Nitrile Reinforced, Trim-to-Fit

TKKEUEP reinforced gasoline fuel filler neck hose — a durable, nitrile-lined 1½" ID replacement hose with four clamps, built to replace worn filler necks and extend from tank to cap.

When a cracked or perished filler neck hose causes fuel odors, leakage risk, or a poor sealing fit, this TKKEUEP 1 1/2" inside-diameter hose provides a ready OEM-style replacement. Constructed with a nitrile inner tube and embedded nylon cording for tensile strength, the hose tolerates cold starts and hot operating temperatures while resisting typical fuel exposure. It arrives 15 7/8" long and includes four hose clamps so you can swap the part straight from the box without hunting down hardware.

How will this hose fit my vehicle's fuel filler neck?

The TKKEUEP filler neck hose is designed as a versatile replacement for many gasoline tanks and filler assemblies that accept a 1½" inside diameter. Measure the old hose’s inner diameter and length before ordering to confirm compatibility. If your original hose is slightly longer, you can trim the TKKEUEP hose to the precise length required.

• Inner diameter: 1 1/2 inches (measure existing hose to confirm)
• Overall length: 15 7/8 inches, cut-to-fit capability
• Includes four adjustable hose clamps for secure connections
• Works with filler neck, vent hose, and many fuel line runs

What materials and temperature range does it tolerate?

This filler hose uses a nitrile fuel-resistant inner tube and a reinforced nylon cord layer to resist stretching and fuel swelling. The material selection provides reliable performance across a wide temperature band so it won’t become brittle in cold weather or soften under normal engine bay heat. It is formulated for use with common gasoline blends within EPA-allowed concentration ranges.

• Nitrile inner tube resists gasoline and common fuel additives
• Embedded nylon cording for improved tensile strength
• Temperature range: -40°F to +212°F (-40°C to +100°C)
• Suitable for up to EPA-allowed concentrations of fuel blends

How easy is installation and customization?

Installation is straightforward: slide the hose onto the filler neck and tank pipe, then tighten the included clamps for a leak-free connection. The hose is flexible and can be trimmed with a utility knife to match the exact length you need, making it suitable for both factory-style replacements and custom routing. The four clamps let you secure both ends plus any intermediate joints if your setup requires them.

• Flexible construction makes routing simple in tight spaces
• Trim-to-fit — cut cleanly with a sharp knife or hose cutter
• Four metal clamps included for immediate installation
• Works with filler necks, vent lines, or short feed runs

Will this hose hold up long-term and resist common fuel issues?

The combination of a nitrile tube and reinforced cord improves resistance to swelling, hardening, and cracking that commonly affect older rubber hoses. While no aftermarket hose is guaranteed for indefinite life, this TKKEUEP unit is built to withstand repeated fuel exposure and temperature cycling better than unreinforced options. Routine inspection and replacing hoses showing wear will ensure safe, reliable service.

• Reinforcement reduces stretch and deformation over time
• Resists common fuel-related deterioration vs non-reinforced hose
• Recommended periodic inspection for leaks, cracks, or stiffness
• Easy replacement process minimizes vehicle downtime

Who is this for? Technicians, DIY mechanics, and fleet maintainers who need a dependable, cut-to-fit filler neck replacement will find this TKKEUEP hose practical and cost-effective. It’s suited for anyone seeking a straightforward swap for a 1½" ID fuel filler line — especially where a reinforced, temperature-resistant hose and included clamps are desired for a secure, professional installation.