TKKEUEP Gasoline Fuel Filler Neck Hose 1.5" ID 45° — 15 7/8" Reinforced with 4 Clamps

TKKEUEP reinforced gasoline fuel filler neck hose is a 45° 1.5-inch inside-diameter replacement hose, 15 7/8" long, supplied with four hose clamps for a secure, EPA-compatible fuel connection.

When a worn or cracked filler neck hose threatens fuel delivery or causes leaks, this TKKEUEP replacement provides a durable, ready-to-install solution. Built from a nitrile inner tube with nylon cording reinforcement, the hose resists common fuels and remains flexible across a broad temperature range. It fits applications that require a 45-degree offset and 1.5" internal diameter, and arrives with four metal clamps so you have everything needed for a straightforward swap.

How durable is this fuel filler neck hose for everyday use?

The hose combines a nitrile tube with internal nylon cording to resist swelling, cracking, and softening from automotive fuels. Its reinforcement improves tensile strength while allowing bending without kinking, so it holds up through repeated fills and engine bay vibration.

• Nitrile inner tube resists gasoline and common fuel blends.
• Internal nylon cording increases tear and pressure resistance.
• Rated temperature range: -40°F to +212°F (-40°C to +100°C).
• Designed to meet concentrations permitted by EPA fuel regulations.

Will this hose fit my vehicle and how do I measure for replacement?

This filler neck hose is made for hoses requiring a 1.5-inch inside diameter and a 45° angle between filler and tank. Measure the internal diameter and total run length of your old hose to confirm fit; the TKKEUEP part arrives 15 7/8" long so trimming for exact length is expected.

• Nominal inside diameter: 1.5 inches (measure existing hose ID).
• Provided length: 15 7/8" — cut to size as needed.
• 45° bend suits many offset filler neck layouts.
• Includes four hose clamps for secure attachment at both ends.

How easy is installation and can I customize the length?

Installation is straightforward and designed for DIY mechanics: slide on the supplied clamps, position the hose, and tighten. The hose is flexible and easily trimmed with a utility knife, allowing precise length adjustments without special tools.

• Flexible construction simplifies routing in tight engine bays.
• Can be cut cleanly to length with a sharp box or utility knife.
• Four clamps included eliminate the need to source hardware separately.
• Clamps tighten securely to prevent leaks at connections.

Is this hose safe for different fuel types and temperatures?

Made with a nitrile tube and reinforced core, the hose tolerates gasoline and common fuel blends within EPA-allowed concentrations. It also withstands a wide temperature span for reliable performance in cold starts and hot engine compartments.

• Compatible with gasoline and many blended fuels up to EPA limits.
• Temperature tolerance from -40°F to +212°F (-40°C to +100°C).
• Reinforcement reduces risk of swelling or softening in warm conditions.
• Suitable for fuel filler neck and vent hose applications.

Who this is for: Home mechanics and professional technicians who need a strong, flexible 45° filler neck replacement with a 1.5" ID. It’s ideal for restoring a secure fuel fill connection on cars, trucks, trailers, or equipment where the original hose is cracked, hardened, or too short. If you want a simple, clamp-ready swap that tolerates standard fuels and temperature extremes, the TKKEUEP hose is a practical, cost-effective choice.