Togsher 3/4" Fuel Transfer Hose 10 ft — Reinforced with Male NPT Fittings, 150 PSI, Diesel/Gasoline/Biodiesel

The Togsher 3/4" Fuel Transfer Hose (10 ft) is a reinforced, multi-layer fuel line with male NPT fittings built to handle diesel, gasoline, kerosene and biodiesel safely for dispensing and tank transfer.

Designed for agricultural, commercial and roadside fueling tasks, this 3/4-inch (19 mm ID) hose combines a nitrile inner tube, stainless-steel braid and a rugged PVC/nitrile outer jacket to balance chemical resistance, tensile strength and flexibility. Rated for a working pressure of 150 PSI and a bursting pressure of 435 PSI, it tolerates temperatures from -40 °F to 212 °F, making it suitable for seasonal extremes and heavy-duty use.

How does this hose stand up to different fuels and chemicals?

This hose is engineered with an oil-resistant nitrile inner layer that resists breakdown from common fuels and petroleum products. It supports diesel, gasoline, kerosene, B20 biodiesel and ethanol blends, plus many lubricants and mineral spirits.

• Inner NBR tube resists fuels and prevents permeation.
• Compatible with E10, E15, E85 and E100 blends where approved.
• Works with B20 biodiesel and most petroleum-based oils.

Will it connect securely to my pump, nozzle, or tank?

The hose comes fitted with male NPT fittings designed for common transfer equipment and farm pumps, offering leak-resistant connections when properly tightened and sealed. Its construction supports repeated installation and removal without rapid wear of the connector interfaces.

• Standard 3/4" male NPT for broad compatibility.
• Reinforced braid minimizes kinking at connection points.
• Pressure-tested assemblies reduce risk of leaks during transfer operations.

How durable and safe is this hose under heavy use?

Built with three layers—nitrile inner, stainless-steel braid and a durable outer jacket—the hose resists abrasion, puncture and pressure surges typical in farm and service environments. It has a generous safety margin between working and burst pressures and is tested for leaks before shipping.

• Working pressure: 150 PSI; burst pressure: 435 PSI.
• Temperature tolerance from -40 °F to 212 °F for varied climates.
• Stainless-steel braid adds tensile strength and kink resistance.

How should I use and maintain the hose for best lifespan?

Use proper clamps or thread-sealant where appropriate, avoid sharp bends and store the hose coiled off the ground away from direct sunlight when not in use. Regularly inspect fittings and the outer jacket for cuts, swelling or stiffness that could indicate chemical attack or aging.

• Drain and rinse after use with reactive fluids when possible.
• Store indoors or under cover to reduce UV and ozone exposure.
• Replace immediately if inner swelling, visible cracking, or leakage appears.

Who is this for: This Togsher 3/4" fuel transfer hose is intended for farmers, mechanics, fleet operators and fuel-service technicians who need a reliable, portable line for dispensing and transferring petroleum products. It fits applications that require durable fittings and broad fuel compatibility, such as farm tanks, portable pumps, diesel refueling, and gasoline storage systems. If you require a hose for high-temperature steam, specialized solvents not listed, or certified aviation fuel use, consult product specifications or contact support to confirm suitability before use.