Togsher 3/4" Fuel Transfer Hose 20 ft — 3/4in NPT Fuel Hose with Stainless-Steel Braid, -40°F to 212°F

The Togsher 3/4" Fuel Transfer Hose (20 ft) is a reinforced, multi-layer fuel hose with male NPT fittings engineered for safe, flexible transfer of diesel, gasoline, kerosene and biodiesel blends.

This 20-foot fuel transfer hose combines a nitrile inner tube, stainless-steel braid, and a weather-resistant outer cover to handle demanding farm and industrial fueling tasks. Built to withstand wide temperatures and high pressures, it connects to standard NPT pump nipples and nozzles for tank-to-tank transfer, dispensing, or temporary fueling lines.

How durable is this hose for heavy use on a farm?

The hose uses a three-layer construction that balances flexibility with strength to resist abrasion, oil exposure, and kinking. Working and burst pressure ratings provide a safety margin for routine transfer operations.

• 3/4" inner diameter (19 mm) for steady flow rates
• Stainless-steel braid reinforcement for tensile strength
• Operates from -40 °F to 212 °F for seasonal extremes
• 150 PSI working pressure; 435 PSI burst tested

Will it work with different fuels and ethanol blends?

This hose is formulated to be compatible with a broad range of petroleum and bio-based fuels without premature swelling or degradation. It suits common agricultural and vehicle fuels, making it a single solution for mixed fleet and storage use.

• Safe for diesel, gasoline, kerosene, and B20 biodiesel
• Compatible with ethanol blends such as E10, E15, E85, and E100
• Also compatible with propane, mineral spirits, and many lubricants
• Inner nitrile compound resists oil and fuel permeation

How does it connect to pumps, nozzles, and tanks?

The hose comes fitted with male NPT fittings that mate with most standard transfer equipment, enabling leak-minimized joints and straightforward installation. Proper thread sealant or tape is recommended to ensure a secure, drip-free connection.

• Standard male NPT ends for wide equipment compatibility
• Designed to work with farm pumps, dispensing nozzles, and storage tanks
• Pressure- and leak-tested before shipping for reliability
• Use approved thread sealants on NPT connections for best results

What maintenance and safety precautions should I follow?

Regular inspections for cracks, wear, or damaged fittings help extend life and prevent spills. Replace the hose at the first signs of excessive abrasion, hardening, or visible inner liner damage, and always follow safe fueling practices.

• Visually inspect hose and fittings before each use
• Keep hose off sharp edges and away from hot exhaust or open flames
• Drain and store indoors when not in use for prolonged protection
• Replace immediately if any leakage or delamination appears

Who is this for? Farmers, fleet managers, small fueling station operators, and anyone needing a reliable, versatile fueling hose for transfer tasks will benefit from the Togsher 3/4" 20-foot hose. It is especially useful where multiple fuel types are used, where equipment compatibility with NPT fittings is required, and where a durable hose that endures temperature swings and heavy handling is needed. For application questions or hookup guidance, Togsher provides pre-sales assistance and responsive after-sales support.