TRUPOW Fuel Transfer Pump Kit 110V — Explosion-Proof Self-Priming 3.7 GPM with Hoses & Nozzle

TRUPOW's 110V self-priming, explosion-proof fuel transfer pump kit is a compact, portable solution for safe and efficient transfer of gasoline, diesel, kerosene and similar low-viscosity fuels.

This compact pump is built for on-site refueling and tank draining where a reliable, electrically powered transfer is needed. The kit combines a cast-iron sealed pump chamber, an explosion-proof motor, reversible flow switch and a full accessory set (suction hose, discharge hose, nozzle, filter and fittings) so you can move fuel quickly with reduced splash and risk. Designed for 110V/60Hz power, it balances portability and capacity for hobbyists, farmers, boat owners and small workshops.

How fast and how far can this pump move fuel?

The TRUPOW pump delivers a high flow for its size — up to approximately 3.7 gallons per minute — and offers strong suction and lift for typical transfer tasks. It supports a suction lift to about 4.9 ft and a vertical discharge lift up to roughly 19 ft, making it suitable for many above-ground tank transfers.

• Rated flow: ~3.7 gallons per minute (GPM)
• Maximum suction length: ~4.9 feet
• Maximum vertical lift: ~19 feet
• Power: 110V/60Hz, 1/10 HP motor with copper windings

Is this pump safe to use with flammable fuels?

Safety features are integrated into the design to minimize spark risks and overheating. The pump uses explosion-proof components, a sealed cast-iron chamber and a thermal-protection cutoff to reduce hazards during routine transfers.

• Explosion-proof motor components to lower spark risk
• Sealed cast-iron pump chamber for durability and containment
• Built-in thermal protection that stops the motor if it overheats
• Bypass prevents backflow for safer handling

What fuels and applications are supported?

This unit is intended for thin-viscosity petroleum fuels and approved for common blends used in vehicles and small engines. It works well for refilling tanks, transferring diesel from storage drums, fueling boats or caravans, and general machinery maintenance.

• Compatible with gasoline blends up to E15, diesel blends up to B20, and kerosene
• Typical uses: vehicles, boats, caravans, agricultural equipment and machinery tanks
• Includes filter, nozzle adaptor and hose clamps for ready-to-use setup
• Recommended intermittent runtime: 30 minutes per running cycle

How easy is it to install, operate and carry?

The pump kit is designed for quick assembly and straightforward operation. It’s lightweight relative to its output, comes with all essential hoses and fittings, and features a reversible switch that changes flow direction without moving the pump.

• Comes with 4.9 ft suction hose, 13 ft discharge hose and a fuel nozzle
• 1/2" NPT inlet/discharge for high-capacity connections
• Reversible pumping via a simple switch for fill or drain tasks
• Compact, portable form factor for easy transport and storage

Who is this for? If you need a portable, electrically powered transfer pump for routine fuel handling — whether you manage a small fleet, maintain equipment, refuel boats or work on remote sites — this TRUPOW kit gives a balance of flow rate, safety features and convenience. It’s aimed at DIYers, farmers, mechanics and marine users who value compact gear that reliably moves gasoline, diesel and kerosene without complex setup.