Universal 16" Slim Electric Radiator Fan 16.05" 12V Push-Pull, 3.27" Low-Profile High-Flow 120W

The 16" Universal Slim Fan Push Pull Electric Radiator Cooling 12V Mount Kit is a reversible, high-flow 120W cooling fan assembly designed to improve radiator and engine-bay cooling while fitting tight spaces.

This slim, 10-blade 16.05" fan delivers strong airflow in a compact package: up to 2000 RPM and a rated CFM over 1000 to assist radiators, condensers, intercoolers and auxiliary oil or transmission coolers. Built for universal fitment, the kit includes mounting brackets and tie straps so you can install it on many radiator sizes and vehicle types without major modification. Its low profile (3.27" thickness) and corrosion-resistant materials make it suitable for cramped engine compartments where clearance matters.

How does this fan improve cooling in tight engine bays?

The slim 3.27" profile lets the fan sit close to the radiator core without interfering with surrounding components. High blade count and optimized RPM produce concentrated airflow behind or in front of the radiator for better heat transfer at idle and low speeds.

• 10-blade design for steady, high-volume airflow
• Maximum RPM around 2000 for effective push/pull operation
• Low thickness preserves clearance around hoses and belts
• Corrosion-resistant materials for long-term fitment

Can I use the fan as both a pusher and puller?

Yes — the unit is reversible and can be mounted to push air through the radiator or pull air from it, allowing you to choose the most effective configuration for your setup. Reversibility helps tailor airflow to your vehicle’s cooling needs and the placement of other components.

• Reversible rotor direction for push or pull installation
• Mounting hardware included to accommodate different orientations
• Useful for radiator-first or condenser-forward arrangements

Is this fan compatible with my vehicle or radiator?

The fan is designed as a universal solution, so it fits many applications as long as your radiator opening can accommodate a 16.05" diameter fan and the 3.27" depth. Use the included brackets and tie straps to adapt to varied radiator frames and shrouds; check clearances around other engine bay parts before final mounting.

• 16.05" diameter suits most aftermarket and factory radiators of similar size
• Universal brackets and tie straps for flexible mounting points
• Works with radiators, condensers, intercoolers, and auxiliary coolers

What electrical and performance specs should I expect?

This 12V fan runs at up to 120W and draws under 11 amps at peak, offering a balance between strong airflow and manageable electrical load for most vehicle systems. Rated RPM is approximately 2000±10%, producing a maximum fan CFM of around 1000 or higher depending on installation and shroud configuration.

• Voltage: 12V DC for standard automotive systems
• Power: 120W with amp draw ≤11A at peak
• RPM: ~2000±10% for consistent airflow
• CFM: ≥1000 CFM depending on installation

Who this is for: This kit is aimed at DIY mechanics, performance enthusiasts and professional installers who need a compact, powerful cooling fan that adapts to many radiator and condenser setups. Choose this fan when space is limited but reliable auxiliary airflow is required for radiators, air conditioning condensers, intercoolers, oil coolers or transmission coolers. If you need a reversible, universal-fit electric fan with included mounting hardware and a high CFM rating, this 16" slim push-pull kit is a practical option.