VALYHOOD 110V AC Diesel Oil Transfer Pump 15GPM (60 L/min) — Cast-Iron, Self-Priming with Thermal Overheat Protection

The VALYHOOD 110V AC 15GPM diesel oil transfer pump is a self-priming, cast-iron fuel pump built to move diesel, kerosene, biodiesel and mineral oil quickly and safely with thermal cut-off protection.

This compact, workshop-ready transfer pump combines a sturdy cast-iron pump chamber with a self-priming motor to deliver up to 15 gallons per minute (60 L/min). It’s designed for routine refueling or tank draining where electric 110V supply is available and provides features meant to reduce backflow and overheating during frequent use. The unit comes with hose adaptors, clamps and an inline oil filter to simplify setup and protect downstream components.

How fast and how far can this pump move fuel?

The VALYHOOD pump offers a high flow rate of up to 15 gallons per minute (60 L/min), making it suitable for quickly transferring fuel between tanks, vehicles, and storage drums. Its maximum suction lift is 16 feet, and it can deliver against a maximum head of 42 feet, so it handles most typical shop and farm transfer tasks.

• Flow rate: 15 GPM / 60 L/min
• Maximum suction lift: 16 ft
• Maximum delivery head: 42 ft
• Motor power: 1/3 HP self-priming

Which liquids is the pump suitable for and which should I avoid?

This model is intended for diesel fuel, kerosene, biodiesel and mineral oil. It is not designed for water, gasoline, ethanol, urea solutions or aggressive chemicals — using incompatible fluids can damage seals and void safe operation.

• Compatible: diesel, kerosene, biodiesel, mineral oil
• Not compatible: gasoline, ethanol, water, urea, chemical liquids
• Recommended max continuous run time: 30 minutes per session

What safety and durability features are built in?

The pump uses a heavy-duty cast-iron sealed chamber for wear resistance and includes a built-in bypass to prevent reverse flow when the motor stops. An automatic thermal protection device will stop the motor if it overheats, helping prevent damage from continuous or blocked operation.

• Cast-iron sealed pump chamber for durability
• Built-in bypass to reduce backflow risk
• Thermal protection automatic stop device for overheating
• Inline oil filter included to keep contaminants out

How easy is it to install and maintain?

Setup is straightforward: the pump ships with two hose adaptors, two clamps and an oil filter so you can connect common fuel hoses to drums, tanks or dispensing nozzles. Routine maintenance consists of checking the inline filter and ensuring the pump isn’t run longer than the recommended intervals to avoid heat build-up.

• Included accessories: 2 hose adaptors, 2 clips, 1 oil filter
• Plug-and-play with 110V AC supply — no complex plumbing required
• Periodic filter inspection recommended; avoid extended runs over 30 minutes

Who this is for: The VALYHOOD 110V AC 15GPM diesel transfer pump is aimed at small to medium workshops, farms, construction sites and fleet operators who need a reliable electric pump to move diesel, kerosene or biodiesel between tanks, vehicles and storage drums. It’s a practical choice when portability, a high flow rate and basic thermal protection are required. If you need a pump for water, gasoline, or corrosive chemicals, choose a model specifically rated for those fluids.