VEEBELL D-Ring Tie Down Anchors 24-Pack Silver — Heavy-Duty 2400 lb Fold-Flat Trailer Mounts

VEEBELL 24-pack D-ring tie down anchors are heavy-duty, zinc-plated surface mounts that provide secure, fold-flat anchor points rated up to 2,400 lbs each for trailers, trucks, campers, and utility beds.

These silver D-rings come as a complete kit—24 anchors and 48 screws—designed to be bolted to wood or metal surfaces to create dependable lashing points for straps, ropes, bungee cords and chains. Each ring pivots within a mounting bracket so it folds flush when not in use, minimizing trip hazards and snagging. Built from solid metal with a corrosion-resistant finish, the set is intended to withstand outdoor exposure and frequent use.

How much load can each D-ring safely handle?

Each VEEBELL D-ring is rated to handle loads up to 2,400 pounds when properly mounted to a structurally sound surface. Load capacity depends on correct installation—using suitable bolts into solid wood framing or reinforced metal—and on the direction of pull.

• Individual D-ring rated to 2,400 lbs (when mounted correctly).
• 1/4" (0.28") hole diameter for standard bolts or screws.
• Use bolts sized and rated for shear and pull-out strength of your substrate.
• Avoid edge mounting on thin materials; reinforce when necessary.

What surfaces and fasteners work for mounting these anchors?

The anchors attach to wood or metal surfaces with 1/4" bolts or screws through the bracket holes. For trailer floors, truck beds, or camper walls, use stainless or grade-rated bolts and backing plates where possible to distribute load and prevent pull-through.

• Fasten to solid wood, steel floors, or reinforced sheet metal.
• Recommended hardware: 1/4" bolts with lock washers and nuts, or self-tapping screws for metal.
• Use washers or backing plates for thin materials to spread load.
• Torque hardware to manufacturer recommendations and inspect periodically.

What sizes and dimensions should I expect?

The D-ring and bracket dimensions are compact for flexible placement while offering generous clearance for common strap fittings. These measurements help ensure compatibility with cam straps, ratchet hooks, ropes, and bungee fittings.

• D-ring outer size: approximately 1.85" x 1.46" x 0.25".
• Bracket plate: about 2.44" x 0.79" with 0.28" hole diameter.
• Inner clearance suitable for most 1" to 1-3/8" strap end fittings.
• Bracket allows up to 180° pivot for easy folding and alignment.

How do these anchors resist rust and weathering?

The VEEBELL anchors are zinc-plated (silver finish) to slow corrosion and offer a longer service life outdoors. While the finish improves resistance to rust from rain and road spray, periodic inspection and cleaning will help maintain performance in harsh conditions.

• Zinc-plated surface for improved corrosion resistance.
• Solid metal construction reduces deformation under load.
• Recommended: rinse salt and debris, inspect hardware regularly.
• Replace any components showing severe corrosion or wear.

Who is this for? This 24-pack is aimed at vehicle owners and fleet operators who need multiple, reliable tie-down points—truck and trailer owners, RV and camper DIYers, small movers, and workshops that outfit vans or flats. If you transport motorcycles, ATVs, kayaks, or general cargo and require fold-flat anchors that accept ratchet straps or ropes, this kit provides a plentiful, corrosion-resistant solution. For best results, pair the anchors with appropriately rated bolts and mounting reinforcement matched to your vehicle’s structure.