VEVOR 6.5L Manual Fluid Extractor Pump – 6.5L Oil & Fluid Extractor with Dipstick and Flexible Hose

VEVOR 6.5L Manual Fluid Extractor Pump is a hand-operated oil and fluid removal kit designed to quickly and cleanly extract engine oil, gear oil, brake fluid and other liquids from vehicles and equipment.

Compact and ready to use out of the box, this VEVOR extractor pairs a 6.5L collection tank with a set of four suction tubes, a dipstick, and a long clear hose so you can remove fluids without crawling under the vehicle or making a mess. The unit works entirely manually, so there’s no need for air lines or power tools — just assemble the tube you need, pump, and transfer spent fluid into the tank for safe disposal.

How does this manual extractor remove oil without changing engine position?

The extractor creates a vacuum within the 6.5L tank when you operate the manual pump, drawing fluid up through the chosen suction tube or hose. Because it pulls fluids out via the dipstick tube or filler neck, you usually don’t need to lift the vehicle or remove drain plugs.

• 6.5L (1.74 gal) sealed tank captures used fluids for transport and disposal.
• Four tube sizes plus a flexible 1480 mm suction hose fit many filler and dipstick openings.
• Manual pump eliminates reliance on compressors or electricity.
• Includes sealing rings to maintain vacuum and prevent spills.

Which fluids and machines can I service with this extractor?

This VEVOR pump handles a wide range of automotive and small-engine liquids, making it useful for cars, motorcycles, lawn equipment, boats and light agricultural machines. It’s intended for suction of engine oil, gear oil, power steering fluid, brake fluid and similar non-corrosive liquids.

• Engine and transmission oil from cars and trucks.
• Motorcycle and ATV oil via narrow-diameter tubes.
• Power steering and hydraulic fluids from compatible reservoirs.
• Small-engine fuel or oil on maintenance jobs where suction is appropriate.

What comes in the kit and how do I set it up?

The kit arrives with everything needed to start extracting: the main tank assembly, a rigid main tube, two extension tubes, a flexible suction hose, a dipstick, sealing rings and a user manual. Assembly is straightforward: attach the chosen tube to the pump head, secure seals, insert into the filler or dipstick opening and operate the hand pump to transfer fluid.

• Main tube: 249 x 1000 mm for direct extraction from deeper openings.
• Extension tubes: 7 x 1200 mm and 6 x 1200 mm for narrow or recessed access.
• Suction hose: 8 x 1480 mm for flexible routing and removal to the tank.
• Dipstick included for level checks and guided insertion.

How do I keep the extractor clean and functioning after use?

Rinse the suction hoses and tubes with a compatible solvent or light detergent after each use, then flush with clean water and allow to dry. Store the tank with the lid open or partially vented to prevent trapped odors and to make the unit ready for the next job.

• Flush lines with an appropriate solvent, then water, for oil residues.
• Wipe the pump head and seals to remove grime, inspect O-rings for wear.
• Drain and recycle collected fluids according to local regulations.
• Store in a dry, ventilated place away from heat sources and sunlight.

Who is this for: The VEVOR 6.5L Manual Fluid Extractor Pump is ideal for DIY mechanics, hobbyists, small repair shops and property owners who perform routine maintenance on cars, motorcycles, lawn and garden equipment, boats or tractors. It suits users who want a portable, power-free solution for fluid changes that minimizes mess and reduces time under the vehicle.