W Pro100 Car Wash Concentrate - 4L Touchless Active Foam Cleaner, Heavy‑Duty Degreaser

W Wash Chems Pro100 is a commercial‑strength, concentrated touchless car wash detergent that creates dense active foam to dissolve grease, road film, and grime on painted, metallic, plastic and rubber surfaces.

Designed for detailers, fleet operators and homeowners who want a fast brushless wash, this 4L active alkaline concentrate doubles as a traffic‑film remover and heavy degreaser. It produces thick foam whether mixed in a pump sprayer or a foam cannon, and it’s formulated to remove organic and inorganic soils while leaving a protective sheen. Because of its high dilution ratios and potency, a little goes a long way for cars, trucks, motorcycles, equipment and even engine bays or interior carpets when used with appropriate extraction tools.

How do I mix and apply W Wash Chems Pro100 for a touchless exterior wash?

There are two reliable application methods: a pump pressure sprayer for wide coverage and a foam cannon for thicker foam. Both methods require a brief dwell time (60–120 seconds) followed by a high‑pressure rinse to lift soils without scrubbing.

• Pump Pressure Sprayer: dilute 1:50–1:100 for general washes; spray, wait 60 seconds, then rinse with a pressure washer (min 2000 PSI).
• Foam Cannon: dilute 1:5–1:8 for dense foam; apply, wait 1–2 minutes, then rinse.
• Heavy soils: use 1:5 for engine or heavily oiled parts; allow contact before rinsing.
• Rims/carpet: rim wash 1:10; carpet extraction 1:10 with a vacuum extractor.

Will this concentrate harm paint, wraps, or ceramic coatings?

Wash Chems Pro100 is formulated to be safe on a variety of surfaces when used as directed and properly diluted. It is designed to remove contaminants without aggressive abrasion, making it suitable for painted panels, vinyl wraps and ceramic‑treated finishes.

• Use recommended dilution ranges to avoid over‑concentration.
• Avoid prolonged dwell on hot surfaces or direct sunlight; rinse within recommended times.
• Test in an inconspicuous area if unsure about a specific finish or aftermarket film.
• Follow with a protectant if desired for extra shine and barrier performance.

How versatile is this product beyond washing cars?

Pro100 is a multipurpose cleaner that works on vehicles and heavy equipment as well as household and workshop tasks. Its active alkaline formula cuts through grease and road grime, making it useful for many cleaning scenarios where emulsification is needed.

• Commercial vehicles, trailers, tractors, and off‑road equipment.
• Engine bays and mechanical parts (use stronger dilutions for oil removal).
• Interior carpets, upholstery and plastics when used with a vacuum extractor.
• Household tasks such as grills, floors and driveways with appropriate dilution.

How much product will I need for regular use and what yields can I expect?

The concentrated formula is designed for high yield: one gallon can replace larger volumes of weaker detergents. Yield depends on dilution but the product is optimized for cost‑effective cleaning across many vehicles.

• General wash dilutions enable up to 25 cars per gallon depending on soil levels.
• One gallon of Pro100 can be equivalent to roughly ten gallons of a typical consumer wash soap.
• Adjust dilution for soil level—heavier soils require more concentrate.
• 4L container suits home detailers, small shops, or mixed fleet use.

Who is this for: W Wash Chems Pro100 suits professional detailers, fleet managers, car enthusiasts and anyone who wants a reliable touchless wash that saves time and water while delivering heavy‑duty cleaning power. If you run a pressure washer, foam cannon or need a versatile concentrate for both exterior and selective interior tasks, this product provides high yield and strong degreasing performance without mechanical scrubbing.