W Pro50 Auto Car Wash Detergent — Concentrated Touchless Active-Foam Cleaner, 2.5 Gallon

W Wash Chems PRO50 is a concentrated, touchless active-foam car wash detergent designed to dissolve heavy dirt and traffic film on cars, trucks, trailers and industrial equipment.

PRO50 is a commercial-grade, alkaline traffic-film remover formulated as a high-foaming concentrate that lets you clean vehicles quickly without brushes. Designed for professional and heavy-duty use, this formula emulsifies organic and inorganic grime, lifts road film and leaves painted, plastic and rubber surfaces clean with a protective sheen. Because it’s highly concentrated, each gallon stretches far beyond conventional soaps, cutting water and product costs for fleets and detail shops.

How does PRO50 remove tough grime without scrubbing?

PRO50 uses an active alkaline concentrate and TFR (Traffic Film Remover) chemistry that penetrates and emulsifies road film, oils and stubborn dirt. The dense foam clings to vertical surfaces to break bonds between contaminants and the vehicle finish, allowing easy rinsing away. It’s formulated to work in touchless workflows, so you can apply, dwell briefly, and rinse without mechanical brushing.

• Active alkaline TFR lifts oils, soot and road film.
• Thick clinging foam increases contact time for better removal.
• Touchless application minimizes finish abrasion and labor.
• Works on painted, metallic, plastic and rubber surfaces.

What vehicles and surfaces are safe to clean with this concentrate?

PRO50 is built for a wide range of vehicles: cars, trucks, trailers, buses, RVs, ATVs, UTVs and heavy equipment. The formula also cleans engines, DPF housings and many industrial surfaces when used with proper dilution and rinsing. It’s safe for wrapped and ceramic-coated vehicles when diluted according to recommendations, but always test an inconspicuous area first.

• Commercial fleet vehicles and heavy machinery.
• Consumer cars, SUVs, and recreational vehicles.
• Engines, grills, patios and concrete when appropriately diluted.
• Interior extractor cleaning for carpets, upholstery, and plastics.

How concentrated is PRO50 and how much will one container do?

PRO50 is a high-strength concentrate formulated to maximize yield: one gallon can replace roughly ten gallons of many competing products. Actual coverage depends on soil level and dilution ratio; with heavier dilution, a single gallon can clean multiple large trucks. This concentration reduces shipping cost per wash and lowers storage footprint for busy operations.

• High-yield concentrate—one gallon equals about ten gallons of typical soaps.
• Adjust dilution for light maintenance washes or heavy-duty cleaning.
• Designed for pressure-foam applicators, foam cannons, and extractor machines.
• Cost-effective for fleets: up to 20 trucks per gallon at specific dilutions.

What are the basic usage steps and safety considerations?

Use PRO50 by diluting to the recommended ratio for your application, apply as foam with a sprayer or cannon, allow brief dwell time, then rinse thoroughly. For interior extractor use, mix per equipment guidelines and extract residue. Always wear appropriate PPE, avoid prolonged skin contact, and follow local disposal rules for cleaning concentrates.

• Mix concentrate with water according to soil level and equipment specs.
• Apply foam, let it work, then rinse thoroughly—no scrubbing required.
• Use gloves and eye protection; keep out of reach of children.
• Test on wrapped or specialty coatings before full application.

Who is this for? PRO50 is aimed at professional detailers, fleet managers, car wash operators and serious DIYers who need a powerful, economical touchless cleaner. If you manage multiple vehicles, heavy equipment, or want a versatile concentrate for both exterior and extractor cleaning, PRO50 offers high performance, strong dilution ratios and time-saving application for demanding cleaning schedules.