waltyotur 12" Hitch Extension Adapter for 2" Receiver — 12-inch Reach, 5/8" Pin, 4,000 lb Capacity

waltyotur 12-inch hitch extension is a black powder-coated carbon steel receiver adapter that adds 12 inches of reach to a 2-inch hitch, accepts a 5/8-inch pin, and supports up to 4,000 lb towing capacity with 500 lb tongue load.

If you need extra clearance from your vehicle for bike racks, cargo carriers, or to gain room for a rear camera or spare tire, this hitch extension provides a simple, heavy-duty solution. Built from carbon steel with a black powder finish, the adapter slips into a standard 2-inch receiver and secures with a 5/8-inch pin. It’s commonly used when a rack or carrier interferes with a rear-mounted spare, folds down tailgate, or sensors.

How much extra reach does this hitch extension provide?

The adapter increases distance from the vehicle by 12 inches measured from pin hole to pin hole, giving you a full foot of additional clearance. That extra space can prevent contact between cargo and the vehicle and allow accessories to sit farther away from bumper sensors.

• Overall added length: 12 inches pin-hole to pin-hole
• Receiver size fits 2-inch factory hitches
• Pin hole diameter: 5/8 inch for common hitch pins

What towing and load limits should I observe?

Use the adapter within the published ratings: a 4,000 lb maximum towing capacity (when used within combined towing system ratings) and a 500 lb maximum tongue weight. Always check your vehicle’s hitch rating and the attached accessory’s limits; the lowest-rated component defines safe capacity.

• Maximum towing capacity listed: 4,000 lbs (system-limited)
• Maximum vertical/tongue load: 500 lbs
• Follow vehicle and accessory manufacturer limits for safe use

How durable and weather-resistant is the finish?

The extension is constructed from all carbon steel for strength and coated with a black powder finish to resist corrosion and chips from everyday use. The powder coat improves longevity in wet and road-salt conditions, though regular inspection and touch-up of any chipped areas will extend service life.

• Material: full carbon steel construction for high strength
• Finish: black powder coating for corrosion resistance
• Recommended: inspect and touch up damaged finish to prevent rust

Will it work with my bike rack or cargo carrier?

The extension is compatible with most bike racks and cargo carriers built for 2-inch hitch receivers and 5/8-inch pin holes. For a snug, rattle-free fit, use a hitch tightener or anti-rattle device; many users add a hitch pin lock for security.

• Designed for 2-inch receiver accessories like racks and carriers
• Pin hole accepts standard 5/8-inch hitch pins or locks
• Hitch tightener recommended to minimize movement and noise

Who is this for? This waltyotur hitch extension suits drivers who need more rear clearance for cargo carriers, bike racks, or to avoid interference with hatches and spare tires. It’s a practical upgrade for weekend cyclists, campers, and anyone mounting rear accessories who wants a durable, straightforward way to add 12 inches of reach. Note: instruction sheet is not included; basic hitch installation knowledge and proper torqueing of fasteners (and verifying vehicle ratings) are recommended before use.