WINSBULL 2" Ball Trailer Hitch with 2" Shank — 2" Drop / 3/4" Rise, 7,250 lb GTW, Weatherproof

WINSBULL's 2-inch ball trailer hitch is a ready-to-install towing kit with a 2" shank, adjustable 2" drop and 3/4" rise, and a 7,250 lb GTW rating for heavier loads.

This hitch assembly is built for drivers who need a durable, flexible connection between vehicle and trailer. It includes the 2" shank that fits standard 2" receivers, a chrome-plated 2" hitch ball, and the pin and clip required for immediate use. The design lets you set a 2" drop or a 3/4" rise to better align trailer and tow vehicle heights, and the black weatherproof finish helps resist corrosion from road exposure.

How does this hitch handle different trailer heights?

The WINSBULL unit gives you both a 2" drop and a 3/4" rise in one assembly so you can fine-tune trailer attitude without extra adapters. Change the orientation of the ball mount to suit your trailer's coupler height, improving towing stability and preventing uneven loading.

• 2" drop position for trailers that sit lower than the vehicle hitch
• 3/4" rise option when the trailer tongue is higher than the receiver
• Single-piece mount avoids extra adapters that add complexity
• Simple reorientation during installation — no special tools beyond basic wrenches

Is this hitch strong enough for boats, campers, and utility trailers?

Yes — the assembly is rated for 7,250 lb gross trailer weight (GTW), placing it above many common 6,000 lb-rated models. That higher capacity gives extra margin when hauling heavier loads like boats, small campers, or fully loaded utility trailers.

• 7,250 lb GTW rating suitable for mid-weight towing jobs
• 2" hitch ball fits standard couplers used on many trailers and boats
• Chrome-plated ball offers durability under load and easier inspection
• Use within vehicle and trailer manufacturer weight limits for safe towing

What hardware and finishes come with the hitch, and how do they protect my setup?

The package includes the 2" shank-mounted ball, hitch pin, and clip so you can install and tow right away. A black weatherproof coating on the mount helps reduce rust and wear from moisture and road salt, while the chrome ball resists pitting and stays serviceable longer.

• Included hitch pin and clip for immediate installation
• Black weatherproof coating protects the mount from corrosion
• Chrome-plated 2" ball resists rust and offers a smooth coupling surface
• Ball shipped un-torqued so you can tighten to your desired orientation (recommended 250 ft·lb)

How do I install and set up the hitch safely?

Installation is straightforward for anyone familiar with receiver-mounted tow balls: slide the 2" shank into your 2" receiver, align the pin holes, insert the hitch pin, and secure the clip. Before towing, torque the hitch ball to the recommended 250 ft·lb and verify all connections and weight limits match your vehicle and trailer specifications.

• Slide 2" shank into a 2" receiver and align pin holes
• Insert included pin and clip; confirm secure fit
• Set ball orientation for drop or rise, then torque to ~250 ft·lb
• Check vehicle/trailer GVWR and tongue weight before towing

Who this is for: Drivers who tow mid-weight loads and want a single, dependable ball mount that combines a 2" shank, adjustable drop/rise, and an above-average 7,250 lb GTW rating. It fits standard 2" receivers and is ideal for boat owners, campers, landscapers, and anyone needing a durable, corrosion-resistant hitch that’s ready to install.