WINTOWIN Adjustable Coil Spacers 4-Pack — 1-2 in 2-Way Lift or Lower, Carbon Steel with Dual Saddles

WINTOWIN 4 Pack Coil Spacers are adjustable carbon-steel spring spacers that let you raise or lower a vehicles ride height by 1" to 2" using a simple wrench.

These 2-way adjustable coil spring spacers fit over strut springs and use a turning nut to either expand or compress the spring seat, providing controlled lift or drop without replacing the entire spring assembly. The set includes four spacers and dual saddles that keep springs centered while adding clearance for larger tires or correcting rear rake. Constructed from hardened carbon steel, the parts are built to resist deformation and stay fixed once installed.

How do these coil spacers change my vehicles ride height?

Adjusting the threaded nut on each spacer increases or decreases the distance between the springs coils, effectively changing the ride height by up to 2". Install the spacer into the springs seat and turn the nut with a wrench to achieve the desired elevation.

• Range: adjustable 1" up to 2" lift or lowering.
• Operate with a single wrench—no spring compressor required for small adjustments.
• Dual saddles maintain spring alignment during and after adjustment.

Will these spacers stay secure under normal driving conditions?

Yes. Each spacer is made from durable carbon steel and designed to lock in place once the adjustment nut is tightened. The installation resists rotation and movement so the spacer remains fixed through daily driving and light off-road use.

• Hardened metal construction reduces bending and deformation.
• Threaded nut locks the saddle position in the coil seat.
• Properly tightened installation prevents unwanted movement.

Can I use this kit to lift or lower all four corners of my vehicle?

The kit includes four spacers, which is sufficient for changing two coil springs (typically a single axle). To adjust all four corners on vehicles with four coil springs, youll need two kits (eight pieces) to cover every spring.

• Included: 4 spacers per package—ideal for a rear or front axle upgrade.
• To modify four springs, purchase a second 4-pack for a total of eight pieces.
• Works as a spacer or mild-leveling device without replacing springs.

What tools and steps are required for installation?

Installation is straightforward: raise the vehicle safely, relieve spring preload, place the spacer and saddle into the coil seat, then turn the nut to expand or compress to the target height. Most installs require only a jack, jack stands, and a wrench.

• Tools: jack, jack stands, basic wrench set.
• Time: typically under an hour per axle with basic mechanical skill.
• Tip: verify clearances and torque after a short test drive.

Who is this for? WINTOWINs 2-way adjustable coil spacers suit do-it-yourselfers and mechanics wanting a reversible, cost-effective method to fine-tune ride height, correct rear sag, or create clearance for larger tires without full spring replacement. They are best for light trucks, SUVs, and cars with coil-spring suspensions where modest lift or lowering (1" to 2") is desired. If you need large lifts, custom springs, or major suspension changes, consult a suspension specialist.