Wizards Turbo Cut Rubbing Compound 32 oz — Heavy-Cut Paint Correction, Time-Release Abrasive for 1200–4000 Grit Finish

Wizards Turbo Cut is a heavy-cut, time-release rubbing compound formulated to remove deep paint defects and sand scratches while finishing down to a 4000-grit–like surface ready for polishing.

Designed for professional detailers and serious DIYers, this 32 oz rubbing compound uses an engineered abrasive system that starts aggressively and eases as you work, reducing haze and pad loading. It performs with both machines and by hand on single-stage paints, clearcoats, and marine gelcoat, and its water-based, silicone-free formula wipes clean so subsequent polish or protection will bond without interference.

How does Turbo Cut remove deep scratches without leaving heavy residue?

The formula uses Time-Release Abrasive Technology: coarse particles do the initial heavy cutting and then break down or redistribute as you continue, so the surface progressively refines. That staged action minimizes leftover compound buildup and reduces the need for repeated wiping or pad changes.

• Aggressive initial cut that lifts 1200-grit or finer sand scratches.
• Self-moderating abrasives that refine to a 4000-grit finish.
• Low pad loading for longer cutting sessions between pad cleans.

Can I use this with a DA or rotary polisher, and at what speeds?

Yes — Turbo Cut is engineered for machine application. It performs best with a blended wool or white cutting pad at 1400–2200 RPM for rotary or comparable speeds on dual-action polishers, delivering consistent material removal while maintaining control during correction passes.

• Optimal range: 1400–2200 RPM with a blended wool pad.
• Suitable for hand application when careful control is needed.
• Works reliably across multiple passes without glazing.

Is this safe for automotive and marine surfaces?

Turbo Cut is formulated to correct defects in automotive single-stage paints and clearcoats as well as gelcoat and fiberglass used in marine applications. It removes exterior oxidation and sand marks while being water-based and silicone-free, which helps prevent staining and ensures compatibility with follow-up coatings.

• Removes 1200-grit or finer sand scratches on cars and trucks.
• Effective on marine gelcoat and neglected fiberglass exteriors.
• Water-based, silicone- and wax-free for clean follow-up prep.

How does Turbo Cut fit into a full buffing and finishing workflow?

Turbo Cut is intended as the heavy-cut step in a multi-stage polishing sequence. Use it first for defect removal, then follow with Wizards Finish Cut on a white foam cutting pad, and finish with a gray foam finishing pad at lower speed to develop gloss and clarity.

• Step 1: Turbo Cut with wool/blended pad for heavy correction.
• Step 2: Wizards Finish Cut with white foam pad to refine the finish.
• Step 3: Final polish with gray finishing pad at ~1000 RPM for gloss.

Who is this for? Wizards Turbo Cut is aimed at professional detailers, body shops, and knowledgeable car enthusiasts who need a powerful, machine-friendly compound that quickly removes deep defects while simplifying cleanup for successive polishing and protection steps. If you restore paint or prep vehicles for high-gloss coatings on cars, trucks, or boats, this product is built for disciplined multi-step correction workflows.