Xion Lab 2-in-1 Rust Converter & Metal Primer — 1 Gallon, Primer-Ready Flat Black, Long-Lasting Corrosion Protection

Xion Lab 2-in-1 Rust Converter & Metal Primer is a single-step industrial-strength coating that chemically transforms rust and primes metal for long-term corrosion protection.

This ready-to-use formula converts existing rust into a stable, protective finish while sealing the surface to slow future corrosion. Designed for demanding environments—from automotive frames and trailers to farm equipment and marine hardware—the product produces a flat black, primer-ready film. Each gallon covers up to 1,000 sq ft depending on surface profile and application method, and cures into a durable barrier within roughly 24 hours under normal conditions.

How does this converter stop rust from progressing?

The active chemistry reacts with iron oxide to create a stable, inert layer that bonds to rusty metal. Once cured, the film isolates the substrate from oxygen and moisture, two essential elements for further oxidation. This interrupts the corrosion cycle and provides a sound base for topcoats if you choose to paint over it.

• Chemical conversion of rust into a stable surface compound
• Sealing action that blocks air and water penetration
• Forms a primer-ready, corrosion-resistant black finish

What surfaces and environments is Xion Lab suitable for?

It's formulated for metal across automotive, agricultural, industrial, construction, and marine settings. The coating tolerates varied surface conditions and adheres to both rusted and bare steel. Use it indoors or outdoors where long-term corrosion control is required.

• Truck frames, trailers, and chassis components
• Farm machinery, construction steel, and industrial equipment
• Marine fittings and other salt-exposed metalwork

How do I apply the 2-in-1 rust converter and primer correctly?

Begin by removing grease, oil, and loose material; the product is designed to work on firm rust but not on flaking scale. Apply with a brush, roller, or sprayer in thin, even coats and allow proper drying between passes. Two or more coats are recommended for heavy corrosion; the coating cures into a tough film within about a day under standard conditions.

• Clean surface of oils, salts, and loose rust before application
• Use brush, roller, or airless sprayer for thin, consistent coats
• Apply at least two coats for worn or pitted metal; allow full cure

Can I topcoat after using Xion Lab, and what finish should I expect?

Yes—after full cure the converter leaves a flat black film that functions as an effective primer for most topcoats. Its surface accepts paints and enamels typically used in automotive and industrial finishing. Topcoating adds UV and color protection but is optional when a matte black protective finish is acceptable.

• Produces a flat black, primer-ready surface
• Accepts common automotive and industrial topcoats
• Topcoat when additional UV, color, or chemical resistance is needed

Who is this for: Xion Lab 2-in-1 Rust Converter & Metal Primer is aimed at professional contractors, restoration shops, and serious DIYers who need a reliable way to stop active corrosion and prepare metal for finishing. If you maintain vehicles, farm or construction equipment, or perform metal restoration where lasting protection and ease of application matter, this product provides an efficient, one-gallon solution made in the USA.