YAMAHA Marine Multi-Purpose Grease 2x10 oz Tubes — Water & Salt-Resistant, Anti-Corrosion

YAMAHA Yamalube Marine Multi-Purpose Grease (two 10-ounce tubes) is a water- and salt-resistant lubricant formulated to stay in place on marine fittings, bearings, and moving parts.

Designed by Yamaha for use in marine environments, this multi-purpose grease delivers dependable lubrication where exposure to water, salt spray and vibration is common. Supplied as a twin pack with an Xfinder sticker, the product is intended for routine maintenance on outboards, steering linkages, trailer components and other friction points that need protection against washout and corrosion.

How will this grease perform on boat hardware and fittings?

The grease is engineered to cling to metal surfaces and maintain a lubricating film even when repeatedly exposed to fresh or salt water. Its formulation resists being washed away and continues to reduce friction under load and vibration.

• High water resistance reduces frequent reapplication.
• Adheres to shafts, pivots, and weather-exposed fittings.
• Works under vibration typical of engines and drive systems.
• Suitable for both on-boat and trailer maintenance points.

What parts and applications is this grease best suited for?

This multi-purpose grease fits a wide range of marine tasks where water resistance and staying power matter. Use it on propeller shafts, steering linkages, latches, winches, trolley rollers and other moving or threaded connections susceptible to corrosion.

• Outboard pivot points and tie bars.
• Prop shaft splines and U-joints where splash occurs.
• Trailer wheel bearings and hitch components during storage or transport.
• Deck hardware and moving fittings exposed to spray.

How should I apply and store Yamalube marine grease?

Apply a thin, even layer to clean surfaces for best adhesion; remove old contaminated grease before relubricating. Store tubes capped in a cool, dry place away from direct sunlight to maintain consistency and shelf life.

• Clean contact area before applying fresh grease.
• Use sparingly in tight fittings to avoid excess squeeze-out.
• Replace caps after use to prevent contamination and drying.
• Keep tubes upright and avoid freezing or extreme heat storage.

Will this grease harm seals or common marine materials?

Yamalube marine grease is formulated for compatibility with typical marine metals and many elastomers used in boats. As with any lubricant, test on a small area if compatibility with a specific rubber or plastic seal is critical.

• Formulated for use on metal-to-metal and metal-to-plastic contact areas.
• Generally safe with standard marine seal materials; spot-test if unsure.
• Designed to resist washout without attacking components under normal use.

Who this is for: Owners, technicians and fleet managers who service Yamaha outboards or maintain boats and trailers will value the product’s marine-grade water resistance and Yamaha-backed design. The twin 10-ounce tubes make it practical for routine maintenance, while the included Xfinder sticker helps keep records of service. Choose this grease when you want a reliable, OEM-oriented lubricant formulated for marine exposure and everyday boat use.