ARCAN Underhoist Support Stand 1,500 lb — Model ALSS15, 54–82 in Adjustable Steel with 12in Contoured Saddle

ARCAN ALSS15 underhoist support stand is a steel service stand that safely supports up to 1,500 lb for under-vehicle work at heights from 54 to 82 inches. The ALSS15 is designed for technicians and serious home mechanics who need a rugged, height-adjustable support when removing or reinstalling exhausts, drivetrains, suspension components, and other undercarriage parts. Built from heavy-gauge steel with an acme threaded screw and bearing-mounted spin handle, this stand offers controlled extension and stable load holding during repair and maintenance tasks. Its contoured 12-inch saddle and broad base give positive contact with odd-shaped components while remaining compact enough to position under a chassis or frame.

How does the height adjustment work for heavy loads?

Height changes are made with a bearing-mounted spin handle connected to a self-locking acme threaded screw, allowing controlled, fine adjustments while under load. The bearing reduces handle effort and smooths rotation so you can raise or lower components without sudden slips.

• Range: 54 in. minimum to 82 in. maximum extension
• Mechanism: bearing-mounted spin handle for smoother rotation
• Safety: self-locking acme thread holds position under load
• Control: precise incremental adjustment for lining up parts

What kinds of vehicle work is this stand best suited for?

The stand is tailored for underhoist support tasks such as removing or positioning exhaust systems, supporting drivetrain pieces during transmission work, and holding suspension parts while other mounts are disconnected. Its flat, contoured saddle accommodates a variety of shapes, making it versatile for multiple service operations.

• Common uses: exhaust removal/installation and drivetrain support
• Also suited for: suspension work and temporary underbody component staging
• Compatibility: works with lifts and hoists to stabilize parts during service
• Stability: 12 in. base reduces tipping and improves contact area

Is the construction durable enough for repeated shop use?

Yes — the ALSS15 is fabricated from steel components sized for professional and heavy hobbyist environments. Welds, fasteners, and the torque-bearing screw are selected to tolerate repeated cycling and the stresses of under-vehicle support when used according to rated capacity.

• Material: heavy-gauge steel body and saddle
• Durability features: robust welded frame and reinforced base
• Load rating: rated for 1,500 lb service loads
• Service life: built to handle frequent shop use when maintained

How do I position and stabilize components safely?

Place the stand beneath the component to be supported while the hoist handles gross positioning, then use the spin handle to fine-tune contact and take the load progressively. Ensure the saddle cradles the part securely and check alignment before removing hoist support or applying additional service forces.

• Procedure: rough-lift with hoist, then transfer load to the stand
• Alignment: use the contoured saddle to center components
• Verification: confirm self-locking screw engagement before work
• Safety tip: keep clear of pinch points and follow lift manufacturer guidance

Who is this for The ARCAN ALSS15 is intended for professional shops, collision centers, and experienced DIY enthusiasts who perform drivetrain, exhaust, or suspension service and need a reliable, compact underhoist support. If you routinely work beneath vehicles and require a controlled, heavy-duty support with a wide height range and a stable contact platform, this stand gives the mechanical control and steel construction expected in repeat-use service environments.

FAQ

Q: What is the maximum load capacity?

A: The ALSS15 supports up to 1,500 lb when used within its rated configuration.

Q: What height range does it cover?

A: Height adjusts from 54 inches up to 82 inches for underhoist positioning.