Armour Detail Supply Panel Prep surface prep spray 16oz — isopropyl formula for pre-wax, sealant & coating adhesion

Armour Detail Supply Panel Prep is a professional-grade surface preparation spray that uses isopropyl alcohol, degreasers, and foaming agents to remove oils and contaminants so coatings and waxes bond consistently.

This 16oz formula was developed to clear residual polishes, buffing oils, and road film from automotive paint so protection products adhere evenly. The blend of solvents and surfactants creates a foaming, lubricated wipe that reduces marring while leaving a residue-free surface. Use it right before applying a wax, paint sealant, or ceramic coating to maximize coverage and durability without harsh abrasion.

How does Panel Prep improve adhesion for waxes and coatings?

Panel Prep strips away microscopic oils, polishing residues, and environmental contaminants that interfere with bonding. By leaving a clean, tack-free surface, it helps sealants and coatings form a uniform layer rather than bead up or pool.

• Removes polishing oils and silicone-based residues
• Evaporates cleanly thanks to isopropyl alcohol content
• Foaming agents lift contaminants for easier removal
• Prevents de-wetting and improves film continuity

Will this product increase the risk of swirls or marring?

The formula includes lubricating foaming agents to reduce friction during application, which minimizes the chance of introducing new marring. Use a fresh, clean microfiber and light pressure for best results.

• Foam delivery cushions the wipe action
• Use soft, low-lint microfiber towels
• Work in small sections to avoid recontamination
• Avoid aggressive rubbing—gentle passes are sufficient

How should I use Panel Prep for coatings, sealants, or wax?

Spray directly onto a panel or onto a microfiber towel and wipe the surface in overlapping passes until the film is removed. Allow remaining alcohol to flash off briefly before applying the protection product.

• Work panel by panel for consistent coverage
• Use two towels if heavily contaminated—one to remove, one to finish
• Let surface become tack-free (a few seconds) before coating
• Not recommended for unpainted plastics without testing

What safety and compatibility tips should I follow?

Panel Prep is a solvent-based cleaner; keep it away from open flames and avoid prolonged skin contact. Test in an inconspicuous area if you are concerned about delicate trim or decals.

• Use in a well-ventilated area
• Wear gloves to protect skin from drying solvents
• Avoid applying to hot panels in direct sunlight
• Rinse or wipe plastic/rubber test spot first if unsure

Who is this for? Armour Detail Supply Panel Prep is aimed at detailers, professional shops, and experienced enthusiasts who want consistent results when applying wax, sealants, or ceramic coatings. It’s suitable for anyone preparing painted surfaces for long-lasting protection, especially after polishing or compounding. If you need a reliable, foaming IPA-based wipe-down that reduces marring and helps guarantee even coverage of protective products, this 16oz panel prep is formulated for that role.

Ingredients

Surface Preperation Solution