BEEST RV Roof Coating White — 1 Gallon Elastomeric Liquid Rubber, Solar-Reflective Waterproof Sealant (Covers ~50 sq ft)

BEEST RV Roof Coating White is a one-gallon elastomeric liquid rubber sealant designed to waterproof, reflect solar heat, and repair leaks on RVs, trailers, and other surfaces.

This white, flexible roof coating bonds to a wide range of materials and creates a waterproof, UV-resistant membrane that helps protect roofs from sun, rain, and temperature swings. Formulated for easy DIY application, the product is solvent-free and low-VOC, so it can be used in and around living spaces with fewer fumes than conventional sealants. One gallon covers approximately 50 square feet when applied to a final thickness recommended by the manufacturer, typically achieved in two to three coats.

How does this coating stop leaks on an RV roof?

The elastomeric formula cures into a continuous rubber-like layer that fills small cracks and adheres to seams and fasteners to block water entry. Its flexibility allows it to expand and contract with roof movement, reducing the chance that repaired areas will split open again.

• Forms a seamless waterproof membrane over the substrate
• Adheres to metal, rubber, wood, concrete, and more
• Flexible to resist cracking from thermal cycling and vibration
• Recommended primer for EPDM and other specific surfaces

Will this coating reduce heat inside my camper?

The bright white, solar-reflective surface deflects a portion of sunlight, which can lower roof-surface temperatures compared with darker finishes. While it helps reduce heat gain through the roof, interior temperature improvements depend on insulation and ventilation too.

• Reflective white finish lowers absorbed solar energy
• Works best combined with proper insulation and airflow
• Helps protect roof materials from UV degradation

How do I apply BEEST RV Roof Coating for best results?

Start with a clean, dry surface free of loose debris, oils, and mildew; use BEEST Roof Cleaner & Primer when needed. Apply the product by brush, roller, or a high-quality sprayer in multiple coats, allowing recommended drying times between passes until you reach the specified thickness.

• Clean thoroughly and remove loose material before coating
• Use primer on EPDM and other manufacturer-specified substrates
• Apply 2–3 coats, waiting about 4 hours between coats; full cure in ~48 hours (40–90°F)
• Coverage: roughly 1 gallon per 50 sq ft at final thickness

Is this product safe for people, pets, and the environment?

BEEST RV Roof Coating is formulated to be low in volatile organic compounds and solvent-free, reducing strong odors and indoor impact during application. While the product is designed with safety in mind, standard precautions like good ventilation, gloves, and eye protection are recommended until the coating cures.

• Ultra-low VOC, solvent-free formulation
• Intended for indoor and outdoor use after curing
• Follow label instructions for safe handling and storage

Who this is for: This coating is ideal for RV owners, camper restorers, and DIYers who need a durable, weather-resistant seal that’s easy to apply. It also suits homeowners and contractors looking to protect flat roofs, gutters, foundations, and other surfaces that benefit from a flexible, waterproof membrane. Choose BEEST when you want an American-made, elastomeric roof coating designed for long-lasting protection with professional-level performance from a single-gallon option.