CARPRO IronX Iron Remover Spray 1L — Acid-Free, pH-Balanced Fallout and Brake Dust Remover

CARPRO IronX is an acid-free, pH-balanced iron remover that safely dissolves ferrous contamination to prevent rust spots and premature clear coat damage across paint, wheels, glass and metal surfaces.

IronX is formulated to neutralize iron particles and brake dust that embed in automotive finishes, turning them into a water-soluble compound that rinses away. Cherry-scented and designed for professional and enthusiast use, this 1-liter bottle with sprayer treats wheels, painted panels, clear coats, chrome and glass without aggressive acids. Using IronX as part of your decontamination routine reduces surface staining and helps coatings and paintwork last longer when applied correctly.

How does IronX remove iron contamination without harming my paint?

IronX is pH-balanced and formulated to react selectively with ferrous particles, converting embedded iron into a soluble residue that releases from the surface. Because it is acid-free, it avoids the aggressive etching associated with traditional acid-based fallout removers. The product is safe for regular use when applied, agitated if necessary, and rinsed according to instructions.

• Acid-free, pH-balanced chemistry that targets ferrous metals
• Neutralizes brake dust and airborne iron particulates
• Safe for painted clear coats, wheels, chrome, and glass
• Cherry scent for more pleasant application

When should I use IronX during detailing?

Use IronX after a rinse and before shampooing or before applying a paint coating. It works best on a cooled surface out of direct sunlight and on a vehicle free of loose dirt. For wheels, apply thoroughly and let the reaction loosen embedded brake dust before agitation and rinse.

• Apply after initial rinse and before washing
• Ideal for wheel barrels, lug areas, and lower panels
• Work on shaded, cool surfaces for best results
• Rinse and follow with shampoo or protection layer

Is IronX compatible with ceramic coatings and sealants?

IronX is widely used by professionals prior to coating application because it removes bonded iron that can interfere with adhesion and gloss. When rinsed and dried properly, it prepares the surface for coatings without stripping properly cured ceramic layers. For freshly applied coatings follow the coating maker’s cure time before using any decontamination spray.

• Prepares surfaces by removing bonded contaminants
• Safe when used according to coating cure instructions
• Doesn’t aggressively strip cured protective layers
• Preferred by pros for pre-coating decontamination

How do I apply IronX safely for best results?

Spray IronX evenly on a cooled, wet surface and allow the product to work — you’ll notice a color change as iron reacts. Agitate with a soft brush on wheels or stubborn areas, then rinse thoroughly. Avoid letting it dry on the surface; follow label directions for dwell time and rinsing to protect trim and sensitive finishes.

• Spray on wet, shaded surfaces and watch for color change
• Agitate wheels with a dedicated brush if needed
• Rinse completely; do not allow product to dry on the car
• Use gloves and eye protection when handling concentrate

Who is this for: CARPRO IronX is built for car enthusiasts, detailers and professional shops that want a safe, non-acidic method to remove iron fallout and reduce risks of rust stains and premature clear coat problems. It suits owners of modern clear-coated vehicles, coated or uncoated wheels, chrome trim, and anyone preparing paint for polishing or protective coatings who needs effective, professional-grade fallout removal.